Wenzhou Kaixin Metaal Co, LTD
A stainless steel short stub end is a type of pipe fitting used in piping systems to connect two pipes of different sizes or materials. It is designed as a short length of pipe with one end shaped like a flange and the other end plain, allowing it to be welded to the pipe or fitting. The flange end is used to connect to a companion flange, making it easy to remove the joint for maintenance or repair. Stainless steel is used for its excellent resistance to corrosion and high temperatures, making it ideal for use in aggressive environments. Short stub ends are commonly used in petrochemical, chemical, and water treatment plants, as well as in food and beverage processing facilities.
Specification For Kort Stub End
| Maten | 1/2” tot 36”, (naadloos tot 24”), (gelast van 8” tot 36”) |
| Normen | ANSI/ASME: ASTM A403 / ASME SA403, ANSI B16.9, ASME B16.25, ASME B16.28, MSS SP-43.DIN: DIN 2605, DIN 2615, DIN 2616, DIN 2617, DIN 28011, EN: EN 10253-1, EN 10253-2 |
| Afmetingen | ASME/ANSI B16.9, MSS-SP-43 Type A, MSS-SP-43 Type B, JIS B2312, JIS B2313, ASME B16.28 |
| Dikte | Model 5S, 10S, 20S, S10, S20, S30, STD, 40S, S40, S60, XS, 80S, S80, S100, S120, S140, S160, XXS enzovoort. |
| Buigradius | R = 1D – 10D, 15D, 20D |
| Van | Short Stub Ends, Pipe Stub Ends, Butt weld Short Stub Ends. |
| Cijfers&Materialen | ASTM A403 WP316/316L, ASTM A403 SA / A 774 WP-S, WP-W, WP-WX 304/304L, ASTM A182 F316L, 304L, DIN 1.4301, DIN 1.4306, DIN 1.4401, DIN 1.4404, ASTM A 815, ASME SA 815, UNS-nummers S31803, S32205. UNS S32750, S32950. Werkstofnr. 1.4462, ASTM A234, ASME SA234 WPB, WPBW, WPHY 42, WPHY 46, WPHY 52, WPH 60, WPHY 65 en WPHY 70.ASTM A420 WPL3, A420 WPL6, ASTM / ASME A/SA 234 Gr. WP 1, WP 5, WP 9, WP 11, WP 12, WP 22, WP 91, ASTM B336, ASME SB336, Nikkel 200 (UNS-nr. N02200), Nikkel 201 (UNS-nr. N02201), Monel 400 (UNS-nr. N04400), Monel 500 (UNS-nr. N05500), Inconel 800 (UNS-nr. N08800), Inconel 825 (UNS-nr. N08825), Inconel 600 (UNS-nr. N06600), Inconel 625 (UNS-nr. N06625), Inconel 601 (UNS-nr. N06601), Hastelloy C 276 (UNS-nr. N10276), Alloy 20 (UNS-nr. N08020), titanium (klasse I en II), koper-nikkel 70/30, CuNi10Fe1Mn, CuNi30Mn1Fe. |
| Type | Naadloos / ERW / Gelast / Op maat vervaardigd |
| Oppervlaktecoatings | Met epoxy gecoat, zwart geverfd, gelakt, gegalvaniseerd. Aansluiting |
| Verbindingstype | Eindstuk met flens / Schroefdraad / Klemverbinding / Lasverbinding / Flens / |
Short Stub End Manufacturing Standards
| ASME-norm | ASME/ANSI B16.9, ASME/ANSI B16.28, MSS-SP-43 |
| DIN-norm | DIN 28011, DIN 2617, DIN 2616, DIN 2615, DIN 2605 |
| EN-norm | EN 10253-2, EN 10253-1 |
| ASME B16.25 | Eindstukken voor stomplassen |
| ASME B16.9 | In de fabriek vervaardigde smeedbeslagdelen voor stomplassen |
| ASME B16.28 | Excentrische verloopstuk van gesmeed staal |
| ASTM A403 – ASME SA403 | Standaardspecificatie voor buisverbindingsstukken van gesmeed austenitisch roestvrij staal |
| MSS SP-43 | Gesmede en vervaardigde stomplasfittingen voor lagedruktoepassingen die bestand zijn tegen corrosie |
Short Stub End Materials and Grades
| Roestvrijstalen, lang stompstuk voor lasverbinding | ASTM A403 WP316/316L, ASTM A403 SA / A 774 WP-S, WP-W, WP-WX 304/304L, ASTM A182 F316L, 304L, DIN 1.4301, DIN 1.4306, DIN 1.4401, DIN 1.4404 |
| Duplex- en superduplexstaal, lang stompstuk voor stuiklassen | ASTM A 815, ASME SA 815 UNS-nr. S31803, S32205. UNS S32750, S32950. Werkstofnr. 1.4462 |
| Lange stomp met lasverbinding van koolstofstaal | ASTM A234, ASME SA234 WPB, WPBW, WPHY 42, WPHY 46, WPHY 52, WPH 60, WPHY 65 en WPHY 70. |
| Lange stomp met stootlasverbinding van koolstofstaal voor lage temperaturen | ASTM A420 WPL3, A420 WPL6 |
| Lang stompstuk van gelegeerd staal, geschikt voor stomplassen | ASTM / ASME A/SA 234 Gr. WP 1, WP 5, WP 9, WP 11, WP 12, WP 22, WP 91 |
| Lang stompstuk van nikkellegering voor stomplassen | ASTM B336, ASME SB336, Nickel 200 (UNS-nr. N2200), Nickel 201 (UNS-nr. N02201), Monel 400 (UNS-nr. N04400), Monel 500 (UNS-nr. N05500), Inconel 800 (UNS-nr. N08800), Inconel 825 (UNS-nr. N08825), Inconel 600 (UNS-nr. N06600), Inconel 625 (UNS-nr. N06625), Inconel 601 (UNS-nr. N06601), Hastelloy C 276 (UNS-nr. N10276), Alloy 20 (UNS-nr. N08020), Titanium (klasse I & II), koper-nikkel 70/30, CuNi10Fe1Mn, CuNi30Mn1Fe. |
Short Stub End Types
Short Stub End are offered in three different ways, Type A, B and C. Type A and B stub end are similar to forged fittings, such as elbows and tees, and type C stub end are made in customized sizes.
Type A
The Type A Short Stub End is employed for standard joint flange. The lap thickness on the stub end is bigger than or up to the nominal thickness of pipe wall. Additionally, the outer corner radius of the sort A will receive the Long flange. The within corner is square. Lap sometimes includes a machined rough face.
Type B
The Type B Short Stub End is employed for standard slip on flanges as lap flanges. The lap thickness on these short ends is bigger than or up to the nominal thickness of pipe wall. Also, the outer corner radius of type B is tiny enough to receive the slip o flange which will be used as a backup flange. The inner corner is square. Short Stub End sometimes includes a machined rough face.
Type C
The Type C Short Stub End will be used for standard Long flange, and put on flange. It’s flaring feat a rounded edge at the within diameter of the lap. If necessary, the radius will be created closed to a square. The lap thickness is 75th of the pipe wall. The sort C is very short enough to accommodate any backup flange. The Short Stub End on kind C is smooth, and it’s not machined.The lap thickness is 75th of the pipe wall. The sort C is very short enough to accommodate any backup flange. The Long Stub End on kind C is smooth, and it’s not machined.
Short Stub End Dimensions
| Product | Nominale buismaat | Diameter (G) | Length (J) | Outside Diameter (O.D.) | Schedule 10S Approx. Weight | Schedule 10S, Inside Diameter (I.D.) | Schedule 10S, Wall Thickness (T) | Schedule 5S Approx. Weight | Schedule 5S, Inside Diameter (I.D.) | Schedule 5S, Wall Thickness (T) |
| 1 1/2″ Lap- Joint Stub End / Stub Ends Short Type “C” | 1.5 | 2.875 | 2 | 1.9 | 0.44 | 1.682 | 0.109 | 0.29 | 1.77 | 0.065 |
| 1 1/4″ Lap- Joint Stub End / Stub Ends Short Type “C” | 1.25 | 2.5 | 2 | 1.66 | 0.42 | 1.442 | 0.109 | 0.21 | 1.53 | 0.065 |
| 1″ Lap- Joint Stub End / Stub Ends Short Type “C” | 1 | 2 | 2 | 1.315 | 0.31 | 1.097 | 0.109 | 0.19 | 1.185 | 0.065 |
| 1/2″ Lap- Joint Stub End / Stub Ends Short Type “C” | 0.5 | 1.375 | 2 | 0.84 | 0.14 | 0.674 | 0.083 | 0.13 | 0.71 | 0.065 |
| 10″ Lap- Joint Stub End / Stub Ends Short Type “C” | 10 | 12.75 | 5 | 10.75 | 9.46 | 1042 | 0.165 | 7.48 | 10.482 | 0.134 |
| 12″ Lap- Joint Stub End / Stub Ends Short Type “C” | 12 | 15 | 6 | 12.75 | 16.07 | 12.39 | 0.18 | 15 | 12.438 | 0.156 |
| 14″ Lap- Joint Stub End / Stub Ends Short Type “C” | 14 | 16.25 | 6 | 14 | 23.1 | 13.624 | 0.188 | 19.2 | 13.688 | 0.156 |
| 16″ Lap- Joint Stub End / Stub Ends Short Type “C” | 16 | 18.5 | 6 | 16 | 27.2 | 15.624 | 0.188 | 23.9 | 15.67 | 0.165 |
| 18″ Lap- Joint Stub End / Stub Ends Short Type “C” | 18 | 21 | 6 | 18 | 32.4 | 17.624 | 0.188 | 28.5 | 17.67 | 0.165 |
| 2 1/2″ Lap- Joint Stub End / Stub Ends Short Type “C” | 2.5 | 4.125 | 2.5 | 2.875 | 1 | 2.635 | 0.12 | 0.75 | 2.709 | 0.083 |
| 2″ Lap- Joint Stub End / Stub Ends Short Type “C” | 2 | 3.625 | 2.5 | 2.375 | 0.81 | 2.157 | 0.109 | 0.44 | 2.245 | 0.065 |
| 20″ Lap- Joint Stub End / Stub Ends Short Type “C” | 20 | 23 | 6 | 20 | 47.7 | 19.564 | 0.218 | 36.3 | 19.624 | 0.188 |
| 24″ Lap- Joint Stub End / Stub Ends Short Type “C” | 24 | 27.25 | 6 | 24 | 58.27 | 23.5 | 0.25 | 56 | 23.564 | 0.218 |
| 3″ Lap- Joint Stub End / Stub Ends Short Type “C” | 3 | 5 | 2.5 | 3.5 | 1.25 | 3.26 | 0.12 | 0.94 | 3.334 | 0.083 |
| 3/4″ Lap- Joint Stub End / Stub Ends Short Type “C” | 0.75 | 1.688 | 2 | 1.05 | 0.18 | 0.884 | 0.083 | 0.14 | 0.92 | 0.065 |
| 4″ Lap- Joint Stub End / Stub Ends Short Type “C” | 4 | 6.188 | 3 | 4.5 | 1.88 | 4.26 | 0.12 | 1.38 | 4.334 | 0.083 |
| 5″ Lap- Joint Stub End / Stub Ends Short Type “C” | 5 | 7.313 | 3 | 5.563 | 2.63 | 5.295 | 0.134 | 2.06 | 5.345 | 0.109 |
| 6″ Lap- Joint Stub End / Stub Ends Short Type “C” | 6 | 8.5 | 3.5 | 6.625 | 3.56 | 6.357 | 0.134 | 2.75 | 6.407 | 0.109 |
| 8″ Lap- Joint Stub End / Stub Ends Short Type “C” | 8 | 10.625 | 4 | 8.625 | 6.19 | 8.329 | 0.148 | 3.88 | 8.407 | 0.109 |
| STUB-EINDEN – afmetingen volgens ANSI B 16.9 en MSS SP-43 | |||||||
| inches | ND | mm | Diameter van de lap | Afschuiningradius | Lengte F | ||
| D | G | R | R1 | MSS SP43 | ANSI B16.9 | ||
| 1/2 | 15 | 21,34 | 34,92 | 3,17 | 0,80 | 50,80 | 76,20 |
| 3/4 | 20 | 26,67 | 42,86 | 3,17 | 0,80 | 50,80 | 76,20 |
| 1 | 25 | 33,40 | 50,80 | 3,17 | 0,80 | 50,80 | 101,60 |
| 1 1/4 | 32 | 42,16 | 63,50 | 4,76 | 0,80 | 50,80 | 101,60 |
| 1 1/2 | 40 | 48,26 | 73,00 | 6,35 | 0,80 | 50,80 | 101,60 |
| 2 | 50 | 60,32 | 92,10 | 7,93 | 0,80 | 63,50 | 152,40 |
| 2 1/2 | 65 | 73,02 | 104,80 | 7,93 | 0,80 | 63,50 | 152,40 |
| 3 | 80 | 88,90 | 127,00 | 9,52 | 0,80 | 63,50 | 152,40 |
| 3 1/2 | 90 | 101,60 | 139,70 | 9,52 | 0,80 | 76,20 | 152,40 |
| 4 | 100 | 114,30 | 157,20 | 11,11 | 0,80 | 76,20 | 152,40 |
| 5 | 125 | 141,30 | 185,70 | 11,11 | 1,58 | 76,20 | 203,20 |
| 6 | 150 | 168,27 | 215,90 | 12,70 | 1,58 | 88,90 | 203,20 |
| 8 | 200 | 219,07 | 269,80 | 12,70 | 1,58 | 101,60 | 203,20 |
| 10 | 250 | 273,05 | 323,80 | 12,70 | 1,58 | 127,00 | 254,00 |
| 12 | 300 | 323,85 | 381,00 | 12,70 | 1,58 | 152,40 | 254,00 |
| 14 | 350 | 355,60 | 412,70 | 12,70 | 1,58 | 152,40 | 304,80 |
| 16 | 400 | 406,40 | 469,90 | 12,70 | 1,58 | 152,40 | 304,80 |
| 18 | 450 | 457,20 | 533,40 | 12,70 | 1,58 | 152,40 | 304,80 |
| 20 | 500 | 508,00 | 584,20 | 12,70 | 1,58 | 152,40 | 304,80 |
| 22 | 550 | 558,80 | 641,30 | 12,70 | 1,58 | 152,40 | 304,80 |
| 24 | 600 | 609,60 | 692,10 | 12,70 | 1,58 | 152,40 | 304,80 |
| De wanddikte T mag niet kleiner zijn dan de nominale wanddikte van de buis | |||||||
Short Stub End Length
| Nominaal | Tijdschema | D | t | G | F | R. Max. | kg / St. | |
| 1/2 “ | 10s | 21.3 | 2.11 | 34.9 | 50.8 | 3.18 | 0.07 | s |
| jaren 40 | 2.77 | 0.09 | s | |||||
| 3/4 “ | 10s | 26.7 | 2.11 | 42.9 | 50.8 | 3.18 | 0.10 | s |
| jaren 40 | 2.87 | 0.12 | s | |||||
| 1 “ | 10s | 33.4 | 2.77 | 50.8 | 50.8 | 3.18 | 0.16 | s / w |
| jaren 40 | 3.38 | 0.17 | s | |||||
| 1 1/4 “ | 10s | 42.2 | 2.77 | 63.5 | 50.8 | 4.76 | 0.22 | s |
| jaren 40 | 3.56 | 0.25 | s | |||||
| 1 1/2 “ | 10s | 48.3 | 2.77 | 73.0 | 50.8 | 6.35 | 0.25 | s / w |
| jaren 40 | 3.68 | 0.31 | s | |||||
| 2 “ | 10s | 60.3 | 2.77 | 92.1 | 63.5 | 7.94 | 0.43 | s / w |
| jaren 40 | 3.91 | 0.61 | s | |||||
| 2 1/2 “ | 10s | 73.0 | 3.05 | 104.8 | 63.5 | 7.94 | 0.57 | s / w |
| jaren 40 | 5.16 | 0.80 | s | |||||
| 3 “ | 10s | 88.9 | 3.05 | 127.0 | 63.5 | 9.53 | 0.73 | s / w |
| jaren 40 | 5.49 | 1.13 | s | |||||
| 4 “ | 10s | 114.3 | 3.05 | 157.2 | 76.2 | 11.11 | 1.09 | s / w |
| jaren 40 | 6.02 | 1.87 | s | |||||
| 5 “ | 10s | 141.3 | 3.40 | 185.7 | 76.2 | 11.11 | 1.47 | s / w |
| jaren 40 | 6.55 | 2.28 | s | |||||
| 6 “ | 10s | 168.3 | 3.40 | 215.9 | 88.9 | 12.70 | 2.15 | s / w |
| jaren 40 | 7.11 | 3.57 | s / w | |||||
| 8 “ | 10s | 219.1 | 3.76 | 269.9 | 101.6 | 12.70 | 3.22 | s / w |
| jaren 40 | 8.18 | 6.07 | s / w | |||||
| 10 “ | 10s | 273.1 | 4.19 | 323.9 | 127.0 | 12.70 | 5.13 | w |
| jaren 40 | 9.27 | 10.07 | w | |||||
| 12 “ | 10s | 323.9 | 4.57 | 381.0 | 152.4 | 12.70 | 8.16 | w |
| jaren 40 | 9.53 | 14.29 | w | |||||
| 14 “ | 10s | 355.6 | 4.78 | 412.8 | 152.4 | 12.70 | 10.89 | w |
| jaren 40 | 9.53 | 17.15 | w | |||||
| 16 “ | 10s | 406.4 | 4.78 | 469.9 | 152.4 | 12.70 | 12.70 | w |
| jaren 40 | 9.53 | 20.41 | w | |||||
| 18 “ | 10s | 457.2 | 4.78 | 533.4 | 152.4 | 12.70 | 17.24 | w |
| 20 “ | 10s | 508.0 | 5.54 | 584.2 | 152.4 | 12.70 | 21.77 | w |
| 24 “ | 10s | 609.6 | 6.35 | 692.2 | 152.4 | 12.70 | 27.22 | w |
Short Stub End Dimensional Tolerance
MSS SP-43 heeft uitsluitend betrekking op roestvrijstalen stootlasfittingen met lange aansluitstukken, die zijn ontworpen voor gebruik met lange aansluitstukken van Schedule 5S en 10S die geschikt zijn voor gebruik met Schedule 40S-buizen, zoals beschreven in ASME B36.19. De schaal en maattoleranties die in MSS SP-43 worden beschreven, komen grotendeels overeen met die in de ASME B16.9-specificaties van NPS 1/2 tot en met NPS 24, behalve wat betreft de buitendiameter bij de afschuining.
| Lange stompuiteinden | ||
| O.D. van Lap G | Fillet-radius van de overlap – R | Totale lengte. – F |
| +0 -1 | +0-1 | 2 |
| +0 -1 | +0-1 | 2 |
| +0 -1 | +0 -2 | 2 |
| +0-1 | +0 -2 | 2 |
| +0 -1 | +0 -2 | 2 |
| +0 -2 | +0 -2 | 2 |
| +0 -2 | +0-2 | 3 |
| +0 -2 | +0 -2 | 3 |
Short Stub End Weight Chart
| NPS inches | STUB-EINDEN | |||
| Sch. 5S | Sch. 10S | Sch. 40S | Sch. de jaren 80 | |
| 1/2 | 0.06 | 0.08 | 0.12 | 0.13 |
| 3/4 | 0.07 | 0.09 | 0.15 | 0.17 |
| 1 | 0.09 | 0.15 | 0.20 | 0.25 |
| 1 1/4 | 0.13 | 0.20 | 0.30 | 0.35 |
| 1 1/2 | 0.16 | 0.25 | 0.38 | 0.46 |
| 2 | 0.25 | 0.40 | 0.55 | 0.75 |
| 2 1/2 | 0.35 | 0.50 | 0.80 | 1.00 |
| 3 | 0.50 | 0.60 | 1.10 | 1.50 |
| 4 | 0.70 | 1.00 | 1.80 | 2.50 |
| 5 | 1.00 | 1.25 | 2.50 | 3.50 |
| 6 | 1.60 | 1.95 | 3.70 | 5.50 |
| 8 | 2.50 | 3.10 | 5.90 | 10.0 |
| 10 | 4.00 | 4.90 | 10.5 | 14.0 |
| 12 | 6.60 | 7.10 | 15.0 | 20.0 |
| 14 | 6.40 | 7.80 | 15.5 | 20.5 |
| 16 | 7.90 | 9.00 | 18.0 | 24.0 |
| 18 | 9.30 | 10.5 | 21.0 | 28.0 |
| 20 | 12.0 | 13.5 | 23.5 | 31.0 |
| 24 | 16.5 | 19.0 | 28.5 | 38.0 |
| Geschatte gewichten in kg, dichtheid 8 kg/dm³ | ||||
Kort Stub End Angularity Tolerance
| ND | Maximale afwijkingshoek | Max buiten het vlak |
| Q | P | |
| 1/2 van 4 | 1 | 2 |
| 5 tot en met 8 | 2 | 4 |
| 10 tot 12 | 3 | 5 |
| 14 tot en met 16 | 3 | 7 |
| 18 tot en met 24 | 4 | 10 |
| 26 tot en met 30 | 5 | 10 |
| 32 tot 42 | 5 | 13 |
| 44 tot en met 48 | 5 | 20 |
ASME B16.9 Buttweld Short Stub End Available Types
| Buttweld Short Stub End | Butt Weld Short Stub Ends |
| ASME B16.9 Butt weld Short Stub End | Steel Short Stub Ends Fittings |
| Stainless Steel Short Stub End Suppliers | SS Buttweld Short Stub Ends Fitting |
| ANSI B16.9 Buttweld Short Stub End Dealer | ASME B16.28 Buttweld Short Stub Ends Exporter |
| Welded Butt weld Short Stub Ends Stockholder | Seamless Butt weld Short Stub End Distributors |
| Carbon Steel Short Stub End | High Quality Short Stub End Manufacturer |
| ASTM A403 Stainless Steel Short Stub Ends | Duplex Steel Buttweld Short Stub End |
| Super Duplex Steel Buttweld Short Stub End | Copper Nickel Short Stub End |
| High Nickel Alloy Short Stub Ends | Hastelloy Short Stub Ends Stockist |
| Titanium Buttweld Short Stub End | Inconel Butt weld Short Stub End |
Short Stub End Application
- Stainless Steel Buttweld Short Stub End uses in Oil and Gas Pipeline
- Butt weld Short Stub Ends uses in Chemical Industry
- Alloy Steel Short Stub Ends uses in Plumbing
- Buttweld Short Stub Ends uses in Heating
- Buttweld Short Stub End Fittings uses in Water Supply Systems
- ANSI B16.9 Buttweld Short Stub Ends uses in Power Plant
- Buttweld Short Stub End Fitting uses in Paper & Pulp Industry
- Short Stub End uses in General Purpose Applications
- Buttweld Short Stub End uses in Fabrication Industry
- Short Stub End uses in Food Processing Industry
- Buttweld Short Stub Ends uses in Structural Pipe
English
Afrikaans
Arabic
Bengali
Catalan
Chinese
French
Dutch (Belgium)
Dutch
German
Czech
Greek
Hindi
Japanese
Italian
Portuguese
Spanish (Chile)
Spanish (Colombia)
Spanish (Argentina)
Persian
Estonian
Albanian
Russian
Spanish (Peru)
Indonesian
Thai
Vietnamese
Georgian
Korean
Nepali
Polish
Ukrainian
Malayalam
Xhosa