Wenzhou Kaixin Metaal Co, LTD
A butt weld 45 degree long radius elbow is a type of pipe fitting that is used to change the direction of the flow in a piping system by 45 degrees. It is designed with a long radius, which means that the curvature of the elbow is relatively gentle, allowing for a smoother flow of fluid through the system. Butt weld 45 degree long radius elbows are made by welding two pipes or tubes together at a 45 degree angle, with the weld seam being flush with the surface of the elbow. They are commonly used in industries such as oil and gas, petrochemicals, and power generation to connect pipes and redirect the flow of fluids around obstacles or through corners.
Butt weld Fitting 45° Long Radius Elbow Specification
| Normen | ANSI/ASME :ASTM A403 / ASME SA403, ANSI B16.9, ASME B16.25, ASME B16.28, MSS SP-43. DIN : DIN2605, DIN2615, DIN2616, DIN2617, DIN28011 EN : EN10253-1, EN10253-2 |
| Tijdschema | Model 5S, 10S, 20S, S10, S20, S30, STD, 40S, S40, S60, XS, 80S, S80, S100, S120, S140, S160, XXS enzovoort. |
| Maten | Seamless 45° Long Radius Elbow Size: 1/2″~24″ ERW / Welded / Fabricated 45° Long Radius Elbow Size: 1/2″ (15 NB) to 48″ (1200NB) |
| Grades | 304/L/H/LN, 316/L/H/LN/Ti, 321/H, 317/L/LN, 347/H, 310S/H, N08904(904L), S31803,S32205, S32750, S32760, N02200, N02201, N04400, N06600, N06690, N06625, N06985(G3), N08028, N08800, N08810, N08811, N08825Surface |
| Type | Stomplas (BW) / Gelast / ERW / Op maat vervaardigd |
| Afmeting | ANSI B16.9, ANSI B16.28, MSS-SP-43 Type A, MSS-SP-43 Type B, |
Butt weld Fitting 45° Long Radius Elbow MATERIAAL & KWALITEITSKLASSEN
| Stainless Steel Buttweld 45 Degree Long Radius Elbow | ASTM A403 WP316/316L, ASTM A403 SA / A 774 WP-S, WP-W, WP-WX 304/304L, ASTM A182 F316L, 304L, DIN 1.4301, DIN1.4306, DIN 1.4401, DIN 1.4404 |
| Duplex & Super Duplex Steel Buttweld 45 Degree Long Radius Elbow | ASTM A 815, ASME SA 815 UNS-nr. S31803, S32205. UNS S32750, S32950. Werkstofnr. 1.4462 |
| Carbon Steel Buttweld 45 Degree Long Radius Elbow | ASTM A234, ASME SA234 WPB, WPBW, WPHY 42, WPHY 46, WPHY 52, WPH 60, WPHY 65 en WPHY 70. |
| Low Temperature Carbon Steel 45 Degree Long Radius Elbow | ASTM A420 WPL3, A420 WPL6 |
| Alloy Steel Buttweld 45 Degree Long Radius Elbow | ASTM / ASME A/SA 234 Gr. WP 1, WP 5, WP 9, WP 11, WP 12, WP 22, WP 91 |
| Nickel Alloy Buttweld 45 Degree Long Radius Elbow | ASTM B336, ASME SB336, Nickel 200 (UNS-nr. N2200), Nickel 201 (UNS-nr. N02201), Monel 400 (UNS-nr. N04400), Monel 500 (UNS-nr. N05500), Inconel 800 (UNS-nr. N08800), Inconel 825 (UNS-nr. N08825), Inconel 600 (UNS-nr. N06600), Inconel 625 (UNS-nr. N06625), Inconel 601 (UNS-nr. N06601), Hastelloy C 276 (UNS-nr. N10276), Alloy 20 (UNS-nr. N08020), Titanium (klasse I & II), koper-nikkel 70/30, CuNi10Fe1Mn, CuNi30Mn1Fe. |
Applications of 45 DEGREE LONG RADIUS ELBOW
- Stainless Steel 45° Long Radius Elbow uses in Oil and Gas Pipeline
- 45° Buttweld LR Elbow uses in Chemical Industry
- Alloy Steel 45° Long Radius Elbow uses in Plumbing
- 45° Long Radius Elbow Pipe Fittings uses in Food Processing Industry
- Buttweld 45° LR Elbow uses in Structural Pipe
- ANSI B16.9 Buttweld 45° Long Radius Elbow uses in Power Plant
- 45° Long Radius Pipe Elbow uses in Paper & Pulp Industry
- 45 Deg Long Radius Bend uses in Heating
- 45 Degree Long Radius Reducing Elbow uses in Water Supply Systems
- ASME B16.9 Long Radius 45 Deg Elbow uses in General Purpose Applications
- 45° LR Elbow uses in Fabrication Industry
45 Deg Long Radius Elbow Afmetingen
Buttweld 45 Degree Long Radius Elbow Dimension Drawing
| NPS | O.D. D | 90 degrees Long Radius Van begin tot eind A | 45 degrees Long Radius Van begin tot eind B | 90 degrees 3D Van begin tot eind A | 45 degrees 3D Van begin tot eind B |
| 1/2 | 21.3 | 38 | 16 | - | - |
| 3/4 | 26.7 | 38 | 19 | 57 | 24 |
| 1 | 33.4 | 38 | 22 | 76 | 31 |
| 1 ¼ | 42.2 | 48 | 25 | 95 | 39 |
| 1 ½ | 48.3 | 57 | 29 | 114 | 47 |
| 2 | 60.3 | 76 | 35 | 152 | 63 |
| 2 ½ | 73 | 95 | 44 | 190 | 79 |
| 3 | 88.9 | 114 | 51 | 229 | 95 |
| 3 ½ | 101.6 | 133 | 57 | 267 | 111 |
| 4 | 114.3 | 152 | 64 | 305 | 127 |
| 5 | 141.3 | 190 | 79 | 381 | 157 |
| 6 | 168.3 | 229 | 95 | 457 | 189 |
| 8 | 219.1 | 305 | 127 | 610 | 252 |
| 10 | 273 | 381 | 159 | 762 | 316 |
| 12 | 323.8 | 457 | 190 | 914 | 378 |
| 14 | 355.6 | 533 | 222 | 1067 | 441 |
| 16 | 406.4 | 610 | 254 | 1219 | 505 |
| 18 | 457 | 686 | 286 | 1372 | 568 |
| 20 | 508 | 762 | 318 | 1524 | 632 |
| 22 | 559 | 838 | 343 | 1676 | 694 |
| 24 | 610 | 914 | 381 | 1829 | 757 |
| 26 | 660 | 991 | 406 | 1981 | 821 |
| 28 | 711 | 1067 | 438 | 2134 | 883 |
| 30 | 762 | 1143 | 470 | 2286 | 964 |
| 32 | 813 | 1219 | 502 | 2438 | 1010 |
| 34 | 864 | 1295 | 533 | 2591 | 1073 |
| 36 | 914 | 1372 | 565 | 2743 | 1135 |
| 38 | 965 | 1448 | 600 | 2896 | 1200 |
| 40 | 1016 | 1524 | 632 | 3048 | 1264 |
| 42 | 1067 | 1600 | 660 | 3200 | 1326 |
| 44 | 1118 | 1676 | 695 | 3353 | 1389 |
| 46 | 1168 | 1753 | 727 | 3505 | 1453 |
| 48 | 1219 | 1829 | 759 | 3658 | 1516 |
DIMENSIONAL TOLERANCES OF 45 DEGREE LONG RADIUS ELBOW – ASME B16.9
| AFMETINGSTOLERANTIES – BOCHTEN | |||||||
| Voor alle fittingen | Bochtstukken 90/45 graden | 180°-retourzendingen | |||||
| Nominale pijpmaat (NPS) | Buiten-Ø bij Bevel | Binnendiameter Ø aan het einde | Wanddikte t / t1 | Midden tot einde afmeting A-B-C-M | Afmeting van hart tot hart. O | Terug naar Face Dim. K | Afstemming van doelstellingen U |
| 1/2 tot 2 1/2 | 1 | 0,8 | Niet | 2 | 7 | 7 | 1 |
| 3 tot 3½ | 1 | 1,6 | minder | 2 | 7 | 7 | 1 |
| 4 | +2 -1 | 1,6 | dan | 2 | 7 | 7 | 1 |
| 5 en 6 | +3 -1 | 1,6 | 87,50% | 2 | 7 | 7 | 1 |
| 8 | 2 | 1,6 | van de nominale | 2 | 7 | 7 | 1 |
| 10 | +4 -3 | 3,2 | dikte | 2 | 7 | 7 | 2 |
| 12 tot 18 | +4 -3 | 3,2 | 3 | 10 | 7 | 2 | |
| 20 tot en met 24 | +6 -5 | 4,8 | 3 | 10 | 7 | 2 | |
| 26 tot en met 30 | +7 -5 | 4,8 | 3 | ….. | ….. | ….. | |
| 32 tot 48 | +7 -5 | 4,8 | 5 | ….. | ….. | ….. | |
ANGULARITY TOLERANCES OF 45 DEGREE LONG RADIUS ELBOW
| Toleranties voor hoekafwijkingen | ||
| ND | Maximale afwijkingshoek | Max buiten het vlak |
| Q | P | |
| 1/2 van 4 | 1 | 2 |
| 5 tot en met 8 | 2 | 4 |
| 10 tot 12 | 3 | 5 |
| 14 tot en met 16 | 3 | 7 |
| 18 tot en met 24 | 4 | 10 |
| 26 tot en met 30 | 5 | 10 |
| 32 tot 42 | 5 | 13 |
| 44 tot en met 48 | 5 | 20 |
AVAILABLE TYPES OF 45 DEGREE LONG RADIUS ELBOW
| Buttweld 45° Long Radius Elbow | Duplex Steel Buttweld 45° Long Radius Elbow |
| ASME B16.9 Butt weld 45° Long Radius Elbow | High Nickel Alloy 45° Long Radius Elbow |
| Stainless Steel 45° Long Radius Elbow | SS 45° Long Radius Elbow |
| High Quality 45° Long Radius Elbow | Seamless Butt weld 45° Long Radius Elbow |
| Welded Butt weld 45° Long Radius Elbowr | ASME B16.28 Buttweld 45° Long Radius Elbow |
| Carbon Steel 45° Long Radius Elbow | ANSI B16.9 Buttweld 45° Long Radius Elbow |
| Titanium Buttweld 45° Long Radius Elbow | Inconel Butt weld 45° Long Radius Elbow |
| ASTM A403 Stainless Steel 45° Long Radius Elbow | Butt Weld B16.9 45° Long Radius Elbow |
| Super Duplex Steel Buttweld 45° Long Radius Elbow | Copper Nickel 45° Long Radius Elbow |
| Steel 45° Long Radius Elbow | Hastelloy 45° Long Radius Elbow |
WEIGHT OF 45 Deg Long Radius Elbow
Buttweld Elbow Gewicht in LBS and KG
| Type-> | SCHEDULE STD | SCHEDULE XS |
| NPS | LBS | KG | LBS | KG |
| 1/2 | 0.09 | 0.04 | 0.19 | 0.09 |
| 3/4 | 0.09 | 0.04 | 0.19 | 0.09 |
| 1 | 0.25 | 0.11 | 0.31 | 0.14 |
| 1 ¼ | 0.38 | 0.17 | 0.5 | 0.23 |
| 1 ½ | 0.4 | 0.18 | 0.69 | 0.31 |
| 2 | 0.81 | 0.37 | 1.19 | 0.54 |
| 2 ½ | 1.75 | 0.79 | 2.13 | 0.97 |
| 3 | 2.63 | 1.19 | 3.5 | 1.59 |
| 3 ½ | 3.5 | 1.59 | 4.5 | 2.04 |
| 4 | 4.5 | 2.04 | 6.1 | 2.77 |
| 5 | 7.5 | 3.4 | 10.7 | 4.85 |
| 6 | 12 | 5.44 | 17.5 | 7.94 |
| 8 | 23 | 10.43 | 35 | 15.88 |
| 10 | 43 | 19.5 | 53 | 24.04 |
| 12 | 62 | 28.12 | 84 | 38.1 |
| 14 | 80 | 36.29 | 100 | 45.36 |
| 16 | 100 | 45.36 | 135 | 61.23 |
| 18 | 126 | 57.15 | 167 | 75.75 |
| 20 | 160 | 72.57 | 206 | 93.44 |
| 22 | 197 | 89.36 | 260 | 117.93 |
| 24 | 238 | 107.95 | 300 | 136.08 |
| 26 | 275 | 124.74 | 365 | 165.56 |
| 30 | 367 | 166.47 | 488 | 221.35 |
| 36 | 531 | 240.86 | 706 | 320.24 |
Formule voor het zagen van 45-gradenbochten
- R1 = markering 1 op de straal van de bocht
- R2 = markering 2 op de straal van de bocht
- R3 = markering 3 op de straal van de bocht
EC = Elleboogcentrum
OD = buitendiameter
R2 = Markering van de straal aan beide zijden
Formule voor een 45-graden-afslagbocht
(R1) – tan x 1 x (EC – 1/2 OD) x Deg = antwoord
(R2) – tan x 1 x EC … x Deg = antwoord
(R3) – tan x 1 (EC + 1/2 OD) x graden = antwoord
English
Afrikaans
Arabic
Bengali
Catalan
Chinese
French
Dutch (Belgium)
Dutch
German
Czech
Greek
Hindi
Japanese
Italian
Portuguese
Spanish (Chile)
Spanish (Colombia)
Spanish (Argentina)
Persian
Estonian
Albanian
Russian
Spanish (Peru)
Indonesian
Thai
Vietnamese
Georgian
Bhojpuri
Moroccan Arabic
Korean
Nepali
Polish
Ukrainian
Malayalam
Xhosa