Umnxeba: +86-577-85980211  I-imeyile: info@wzinox.com

Wenzhou Kaixin Metal Co.,Ltd

 

Ukufakwa kwemibhobho yentsimbi engatyiwayo yoshishino/

  1. Ikhaya
  2. Iimveliso
  3. Ukufakwa kwemibhobho yentsimbi engatyiwayo yoshishino
  4. Isiphelo esifutshane sentsimbi engatyiwayo
Isiphelo Esifutshane Esingagqatsiweyo Sentsimbi Engatyiwayo

Isiphelo esifutshane sentsimbi engatyiwayo

Igama: Isiphelo esifutshane esirhabaxa

Iisayizi1/2” ukuya kwi-36”, (Engathungwanga ukuya kwi-24”), (Eweldwe 8” ukuya kwi-36”)

Ubukhulu : Ishedyuli 5S, 10S, 20S, S10, S20, S30, STD, 40S, S40, S60, XS, 80S, S80, S100, S120, S140, S160, XXS njl.

Umlinganiselo：ASME/ANSI B16.9, MSS-SP-43 Uhlobo A, MSS-SP-43 Uhlobo B, JIS B2312, JIS B2313, ASME B16.28

IiGradi neZixhobo:ASTM A403 WP316/316L, ASTM A403 SA / A 774 WP-S, WP-W, WP-WX 304/304L, ASTM A182 F316L, 304L, DIN 1.4301, DIN1.4306, DIN 1.4401, DIN 1.4404, ASTM A 815, ASME SA 815 UNS NO S31803, S32205. UNS S32750, S32950. Werkstoff No. 1.4462, ASTM A234, ASME SA234 WPB, WPBW, WPHY 42, WPHY 46, WPHY 52, WPH 60, WPHY 65 & WPHY 70.ASTM A420 WPL3, A420 WPL6, ASTM / ASME A/SA 234 Gr. WP 1, WP 5, WP 9, WP 11, WP 12, WP 22, WP 91, ASTM B336, ASME SB336, iNickel 200 (UNS No. No2200), iNickel 201 (UNS No. N02201), Monel 400 (UNS No. N04400), Monel 500 (UNS No. N05500), Inconel 800 (UNS No. N08800), Inconel 825 (UNS No. N08825), Inconel 600 (UNS No. N06600), Inconel 625 (UNS No. N06625), Inconel 601 (UNS No. N06601), Hastelloy C 276 (UNS No. N10276), Alloy 20 (UNS No. N08020), iTitanium (iGrade I & II), iCupro-Nickel 70/30, CuNi10Fe1Mn, CuNi30Mn1Fe.

Uhlobo: Engaswekwanga / ERW / Eweldeke / Eyenzelweyo

Okuvela ku:Iziphelo ezimfutshane ezingqukuva, Iziphelo ezingqukuva zemibhobho, Iziphelo ezimfutshane ezingqukuva ezidityaniswe ngokubhema.

Umgama wokugoba : R=1D – 10D, 15D, 20D

Izigalelo Zangaphandle:Egqunywe nge-epoxy, epeyintiweyo emnyama, evarnishweyo, egalvanizediweyo. Uqhagamshelwano

Isicelo:  Umbhobho Wamafutha Negesi, Iikhemikhali, Ukuphathwa kwamanzi, Ukuqhutywa kokutya, Imibhobho Yezakhiwo, Izikhululo zombane, Amaphepha nePulp, Izisombululo Zokufudumeza, Iinkqubo Zokunikezela Ngamanzi, Ukuveliswa kwezinto.

Inombolo yemodeli:

Okumvelaphi: Wenzhou,Zhejiang

Umgangatho:ANSI/ASME :ASTM A403 / ASME SA403, ANSI B16.9, ASME B16.25, ASME B16.28, MSS SP-43.DIN : DIN2605, DIN2615, DIN2616, DIN2617, DIN28011, EN : EN10253-1, EN10253-2

Iphakheji: Iphakheji eqhelekileyo yokuthumela ngaphandle

Ixabiso: 10~300 iidola zaseMelika/ngesinye

Ukuhanjiswa: Vumelana Ngesixa

Thumela umbuzo Incoko ephilayo
  • Iinkcukacha Zemveliso

I-stub end emfutshane yentsimbi engatyiwayo luhlobo lwesinxibo sepayipi olusetyenziswa kwiinkqubo zeepayipi ukudibanisa iipayipi ezimbini ezinobukhulu okanye izinto ezahlukeneyo. Yenzelwe ukuba ibe yinxalenye emfutshane yepayipi enecala elinye elimile okwe-flange nelinye icala lalo lisisicaba, nto leyo eyenza ukuba iwelde kwipayipi okanye kwesinye isinxibo. Incam ene-flange isetyenziselwa ukudibanisa kwi-flange ehambelanayo, nto leyo eyenza kube lula ukukhulula umdibaniso ukuze wenziwe ulungiso okanye ukulungiswa. Intsimbi engatyiwayo isetyenziswa ngenxa yokumelana kwayo okugqwesileyo nokugqwala kunye namaqondo obushushu aphezulu, nto leyo eyenza ilungele ukusetyenziswa kwiimeko eziyingozi. Iziphelo ezimfutshane ezingqukuva zisetyenziswa kakhulu kumashishini e-petrochemical, eekhemikhali, nawokucocwa kwamanzi, kunye nakwiindawo zokuvelisa ukutya neziselo.

 Iinkcukacha ze Imfutshane Isiphelo esirhabaxa

Iisayizi1/2” ukuya kwi-36”, (Engathungwanga ukuya kwi-24”), (Eweldwe 8” ukuya kwi-36”)
ImigangathoANSI/ASME :ASTM A403 / ASME SA403, ANSI B16.9, ASME B16.25, ASME B16.28, MSS SP-43.DIN : DIN2605, DIN2615, DIN2616, DIN2617, DIN28011, EN : EN10253-1, EN10253-2
ImilinganiseloASME/ANSI B16.9, MSS-SP-43 Uhlobo A, MSS-SP-43 Uhlobo B, JIS B2312, JIS B2313, ASME B16.28
UbukhuluIshedyuli 5S, 10S, 20S, S10, S20, S30, STD, 40S, S40, S60, XS, 80S, S80, S100, S120, S140, S160, XXS njl.
Umgama wokugoba R=1D – 10D, 15D, 20D
Ukusuka kuIziphelo ezimfutshane ezingqukuva, Iziphelo ezingqukuva zemibhobho, Iziphelo ezimfutshane ezingqukuva ezidityaniswe ngokubhema.
IiGradi&IzintoASTM A403 WP316/316L, ASTM A403 SA / A 774 WP-S, WP-W, WP-WX 304/304L, ASTM A182 F316L, 304L, DIN 1.4301, DIN1.4306, DIN 1.4401, DIN 1.4404, ASTM A 815, ASME SA 815 UNS NO S31803, S32205. UNS S32750, S32950. Werkstoff No. 1.4462, ASTM A234, ASME SA234 WPB, WPBW, WPHY 42, WPHY 46, WPHY 52, WPH 60, WPHY 65 & WPHY 70.ASTM A420 WPL3, A420 WPL6, ASTM / ASME A/SA 234 Gr. WP 1, WP 5, WP 9, WP 11, WP 12, WP 22, WP 91, ASTM B336, ASME SB336, iNickel 200 (UNS No. No2200), iNickel 201 (UNS No. N02201), Monel 400 (UNS No. N04400), Monel 500 (UNS No. N05500), Inconel 800 (UNS No. N08800), Inconel 825 (UNS No. N08825), Inconel 600 (UNS No. N06600), Inconel 625 (UNS No. N06625), Inconel 601 (UNS No. N06601), Hastelloy C 276 (UNS No. N10276), Alloy 20 (UNS No. N08020), iTitanium (iGrade I & II), iCupro-Nickel 70/30, CuNi10Fe1Mn, CuNi30Mn1Fe.
UhloboEngaswekwanga / ERW / Eweldeke / Eyenzelweyo
Izigalelo ZangaphandleEgqunywe nge-epoxy, epeyintiweyo emnyama, evarnishweyo, egalvanizediweyo. Uqhagamshelwano
Uhlobo loqhagamshelwanoIsiphelo seNtsimbi / Esineziphatho / Isiphelo seKhlampu / Ukuwelda / Iflensi /

Imigangatho yokuveliswa kwe-Short Stub End

Umgangatho we-ASMEASME/ANSI B16.9, ASME/ANSI B16.28, MSS-SP-43
Umgangatho we-DINDIN28011, DIN2617, DIN2616, DIN2615, DIN2605
Umgangatho we-ENEN10253-2, EN10253-1
ASME B16.25Ukudibanisa iipayipi ngomlomo
ASME B16.9Izidibanisi zentsimbi eyenziwe ngomatshini zokudibanisa ngokufaka
ASME B16.28Isinciphisi Esigoso Esenziwe Ngentsimbi Eyomeleziweyo
ASTM A403 – ASME SA403Imigqaliselo esemgangathweni yokufakwa kweepayipi zentsimbi engatyiwayo yohlobo lwe-austenitic eyenziwe ngesinyithi
MSS SP-43Isinxibo esitywiniweyo esisetyenzwe ngobuchule sokudibanisa, esilungiselelwe ukusetyenziswa kwiimeko zoxinzelelo oluphantsi nezingangeni mhlwa

Izinto Neendidi Zesiphelo Esimfutshane Se-stub

Isiphelo eside esincinane sentsimbi engatyiwayo esidityaniswa ngokushisaASTM A403 WP316/316L, ASTM A403 SA / A 774 WP-S, WP-W, WP-WX 304/304L, ASTM A182 F316L, 304L, DIN 1.4301, DIN1.4306, DIN 1.4401, DIN 1.4404
I-Duplex ne-Super Duplex yentsimbi edityaniswe ngomhlanganiso we-butt, enesiphelo eside esimfutshaneASTM A 815, ASME SA 815 UNS NO S31803, S32205. UNS S32750, S32950. Werkstoff No. 1.4462
Intsimbi yekhabhoni enomqhina oqhwanyisiweyo nesiphelo esifutshane esideASTM A234, ASME SA234 WPB , WPBW, WPHY 42, WPHY 46, WPHY 52, WPH 60, WPHY 65 & WPHY 70.
Intsimbi yeKhabhoni enobushushu obuphantsi, i-Buttweld ende enesiphelo esifutshaneASTM A420 WPL3, A420 WPL6
Intsimbi ye-Alloy enesiphelo esifutshane eside esidityaniswa ngokubutwelaASTM / ASME A/SA 234 Gr. WP 1, WP 5, WP 9, WP 11, WP 12, WP 22, WP 91
Isiphelo eside esinqunyulweyo se-Buttweld ye-Alloy yeNickelASTM B336, ASME SB336, Nickel 200 (UNS No. No2200), Nickel 201 (UNS No. N02201), Monel 400 (UNS No. N04400), Monel 500 (UNS No. N05500), Inconel 800 (UNS No. N08800), Inconel 825 (UNS No. N08825), Inconel 600 (UNS No. N06600), Inconel 625 (UNS No. N06625), Inconel 601 (UNS No. N06601), Hastelloy C 276 (UNS No. N10276), Alloy 20 (UNS No. N08020), iTitanium (iGrade I & II), iCupro-Nickel 70/30, CuNi10Fe1Mn, CuNi30Mn1Fe.

Iindidi zeentsika ezimfutshane

Ii-Short Stub End zifumaneka ngeendlela ezintathu ezahlukeneyo, uHlobo A, B no-C. Uhlobo A no-B lwee-stub end zifana nee-forged fittings, ezifana nee-elbows nee-tees, kwaye uhlobo C lwee-stub end lwenziwa ngobukhulu obulungiselelwe umthengi.

Uhlobo A

I-Type A Short Stub End isetyenziselwa i-flange yokudibanisa eqhelekileyo. Ubukhulu be-lap kwi-stub end bukhulu kunokuba bungangangobukhulu obuqhelekileyo bodonga lwepayipi. Ukongeza, i-radius yekona yangaphandle ye-sort A iya kufumana i-flange ende. Ikona engaphakathi isikwere. I-lap ngamanye amaxesha ibandakanya ubuso oburhabaxa obusikiweyo ngomatshini.

Uhlobo B

I-Type B Short Stub End isetyenziselwa iiflanges eziqhelekileyo zokutyibilika njengeeflanges zokudibanisa. Ubukhulu bokudibanisa kwezi ziphelo zifutshane bukhulu kunokuba bungangangobukhulu obuqhelekileyo bodonga lwepayipi. Kwakhona, i-radius yekona yangaphandle ye-type B incinci ngokwaneleyo ukwamkela iflangi yokutyibilika eza kusetyenziswa njengeflangi yokuxhasa. Ikona yangaphakathi isikwere. I-Short Stub End ngamanye amaxesha ibandakanya ubuso oburhabaxa obusikiweyo ngomatshini.

Uhlobo C

I-Type C Short Stub End iza kusetyenziselwa i-Long flange esemgangathweni, ize ifakwe kwi-flange. Inomsebenzi wokwandisa umphetho ogudileyo kwidayamitha engaphakathi yelaph. Ukuba kuyimfuneko, i-radius iya kwenziwa isondele kwisikwere. Ubukhulu belaph yi-75/100 yobukhulu bodonga lwepayipi. Uhlobo C lufutshane kakhulu ukuze lwamkele nayiphi na i-flange yokuxhasa. I-Short Stub End kwi-Type C igudile, kwaye ayenziwanga ngomatshini. Ubukhulu be-lap yi-75/100 yobukhulu bodonga lwepayipi. I-Type C imfutshane kakhulu kangangokuba ingakwazi ukwamkela nayiphi na i-backup flange. I-Long Stub End kwi-Type C igudile, kwaye ayenziwanga ngomatshini.

Imilinganiselo yecala elifutshane elingqukuva

 

ImvelisoNom. Ubungakanani bepayipiUbubanzi (G)Ubude (J)Ububanzi bangaphandle (O.D.)Ishedyuli 10S Ubunzima obuqikelelwayoIshedyuli 10S, iDayamitha yangaphakathi (I.D.)Ishedyuli 10S, Ubukhulu Bodonga (T)Ishedyuli 5 Ubunzima obuqikelelwayoIshedyuli 5S, iDayamitha yangaphakathi (I.D.)Ishedyuli 5S, Ubukhulu Bodonga (T)
I-1 1/2″ Lap-Joint Stub End / Ii-Stub Ends Zohlobo Olufutshane “C”1.52.87521.90.441.6820.1090.291.770.065
1 1/4″ i-Lap-Joint Stub End / Ii-Stub Ends zoHlobo oluMfutshane “C”1.252.521.660.421.4420.1090.211.530.065
I-Stub End yokuDibanisa eGotywayo eyi-1″ / Ii-Stub End zoHlobo oluMfutshane “C”1221.3150.311.0970.1090.191.1850.065
1/2″ i-Lap-Joint Stub End / Ii-Stub Ends zoHlobo oluMfutshane “C”0.51.37520.840.140.6740.0830.130.710.065
I-10″ Lap-Joint Stub End / Ii-Stub Ends Zohlobo OluMfutshane “C”1012.75510.759.4610420.1657.4810.4820.134
I-12″ Lap-Joint Stub End / Ii-Stub Ends Zohlobo OluMfutshane “C”1215612.7516.0712.390.181512.4380.156
I-14″ Lap-Joint Stub End / Ii-Stub Ends Zohlobo Olufutshane “C”1416.2561423.113.6240.18819.213.6880.156
I-16″ Lap-Joint Stub End / Ii-Stub Ends Zohlobo OluMfutshane “C”1618.561627.215.6240.18823.915.670.165
I-18″ Lap-Joint Stub End / Ii-Stub Ends Zohlobo Olufutshane “C”182161832.417.6240.18828.517.670.165
I-Stub End yokuDibana eGudileyo eyi-2 1/2″ / Ii-Stub End zoHlobo oluMfutshane “C”2.54.1252.52.87512.6350.120.752.7090.083
I-Stub End yokuDibanisa eGudileyo eyi-2″ / Ii-Stub End zoHlobo oluMfutshane “C”23.6252.52.3750.812.1570.1090.442.2450.065
I-20″ Lap-Joint Stub End / Ii-Stub Ends Zohlobo Olufutshane “C”202362047.719.5640.21836.319.6240.188
I-Stub End yokuHlangana eMathangeni eyi-24″ / Ii-Stub End zoHlobo oluMfutshane “C”2427.2562458.2723.50.255623.5640.218
I-Stub End yokuDibanisa eGudileyo eyi-3″ / Ii-Stub End zoHlobo oluMfutshane “C”352.53.51.253.260.120.943.3340.083
I-3/4″ Lap-Joint Stub End / Ii-Stub Ends zoHlobo oluMfutshane “C”0.751.68821.050.180.8840.0830.140.920.065
I-Stub End yokuDibanisa eGudileyo eyi-4″ / Ii-Stub End zoHlobo oluMfutshane “C”46.18834.51.884.260.121.384.3340.083
I-Stub End yokuDibanisa eGudileyo eyi-5″ / Ii-Stub End zoHlobo oluMfutshane “C”57.31335.5632.635.2950.1342.065.3450.109
I-Stub End yokuDibanisa eGudileyo eyi-6″ / Ii-Stub End zoHlobo oluMfutshane “C”68.53.56.6253.566.3570.1342.756.4070.109
I-8″ Lap-Joint Stub End / Ii-Stub Ends Zohlobo OluMfutshane “C”810.62548.6256.198.3290.1483.888.4070.109

 

IZIPHELO EZINGAPHAKATHI – imilinganiselo ye-ANSI B 16.9 ne-MSS SP-43
i-intshiAkukho dathaI-millimeterIdayamitha yokwambathaUmgama wefilletUbude F
 DGRR1MSS SP43ANSI B16.9
1/21521,3434,923,170,8050,8076,20
3/42026,6742,863,170,8050,8076,20
12533,4050,803,170,8050,80101,60
1 1/43242,1663,504,760,8050,80101,60
1 1/24048,2673,006,350,8050,80101,60
25060,3292,107,930,8063,50152,40
2 1/26573,02104,807,930,8063,50152,40
38088,90127,009,520,8063,50152,40
3 1/290101,60139,709,520,8076,20152,40
4100114,30157,2011,110,8076,20152,40
5125141,30185,7011,111,5876,20203,20
6150168,27215,9012,701,5888,90203,20
8200219,07269,8012,701,58101,60203,20
10250273,05323,8012,701,58127,00254,00
12300323,85381,0012,701,58152,40254,00
14350355,60412,7012,701,58152,40304,80
16400406,40469,9012,701,58152,40304,80
18450457,20533,4012,701,58152,40304,80
20500508,00584,2012,701,58152,40304,80
22550558,80641,3012,701,58152,40304,80
24600609,60692,1012,701,58152,40304,80
Ubukhulu be-T (lap thickness) akufuneki bube ngaphantsi kobukhulu obuqhelekileyo bodonga lwepayipi.

  Ubude obufutshane besiphelo esigobileyo

IsibizwanaIshedyuliDtGFR. Max.i-kg / i-St. 
isiqingatha se-intshi“Amashumi21.32.1134.950.83.180.07s
amashumi amane2.770.09s
Isi-3/4“Amashumi26.72.1142.950.83.180.10s
amashumi amane2.870.12s
1 “Amashumi33.42.7750.850.83.180.16s / w
amashumi amane3.380.17s
1 1/4 “Amashumi42.22.7763.550.84.760.22s
amashumi amane3.560.25s
1 1/2 “Amashumi48.32.7773.050.86.350.25s / w
amashumi amane3.680.31s
2 “Amashumi60.32.7792.163.57.940.43s / w
amashumi amane3.910.61s
I-intshi ezimbini enesiqingatha“Amashumi73.03.05104.863.57.940.57s / w
amashumi amane5.160.80s
Thathu “Amashumi88.93.05127.063.59.530.73s / w
amashumi amane5.491.13s
4 “Amashumi114.33.05157.276.211.111.09s / w
amashumi amane6.021.87s
Isihlanu “Amashumi141.33.40185.776.211.111.47s / w
amashumi amane6.552.28s
Isithandathu “Amashumi168.33.40215.988.912.702.15s / w
amashumi amane7.113.57s / w
Isibhozo “Amashumi219.13.76269.9101.612.703.22s / w
amashumi amane8.186.07s / w
ishumi “Amashumi273.14.19323.9127.012.705.13w
amashumi amane9.2710.07w
12 “Amashumi323.94.57381.0152.412.708.16w
amashumi amane9.5314.29w
14 “Amashumi355.64.78412.8152.412.7010.89w
amashumi amane9.5317.15w
16 “Amashumi406.44.78469.9152.412.7012.70w
amashumi amane9.5320.41w
18 “Amashumi457.24.78533.4152.412.7017.24w
20 “Amashumi508.05.54584.2152.412.7021.77w
24 “Amashumi609.66.35692.2152.412.7027.22w

Umda wemilinganiselo wecala elifutshane elingqukuva

I-MSS SP-43 igubungela kuphela iiFittings ze-Stainless Steel ezidityaniswa nge-Butt Weld ezine-Long Stub End, ezenzelwe ukusetyenziswa ne-Schedule 5S ne-10S Long Stub End ezifanelekileyo ukusetyenziswa ne-Schedule 40S Pipe, njengoko kuchaziwe kwi-ASME B36.19. Umlinganiselo kunye noxolelo lwemilinganiselo echazwe kwi-MSS SP-43 ziyafana kakhulu nezo zikwiinkcukacha ze-ASME B16.9 ukusuka kwi-NPS 1/2 — ukuya kwi-NPS 24. Ngaphandle kokuba kuthethwa ngobubanzi bokuphuma kwindawo egobileyo.

Iziphelo ezinde zeStub
O.D. ka Lap GI-radius yefilithi yokulapha – RUbude bebonke. – F
+0 -1+0-12
+0 -1+0-12
+0 -1+0 -22
+0-1+0 -22
+0 -1+0 -22
+0 -2+0 -22
+0 -2+0-23
+0 -2+0 -23

Itshathi yobunzima yeziphelo ezimfutshane

Inani labantu abangaseliyo
i-intshi		Iziphelo zeSibaso
Isikolo.
i-5S		Isikolo.
ishumi se-sekondi		Isikolo.
amashumi amane		Isikolo.
Amashumi asibhozo
1/20.060.080.120.13
3/40.070.090.150.17
10.090.150.200.25
1 1/40.130.200.300.35
1 1/20.160.250.380.46
20.250.400.550.75
2 1/20.350.500.801.00
30.500.601.101.50
40.701.001.802.50
51.001.252.503.50
61.601.953.705.50
82.503.105.9010.0
104.004.9010.514.0
126.607.1015.020.0
146.407.8015.520.5
167.909.0018.024.0
189.3010.521.028.0
2012.013.523.531.0
2416.519.028.538.0
Ubunzima obuqikelelwayo kwi-kg, ubuxinano 8 kg/dm3

Imfutshane Umda wokunyamezela kwe-engile yecala elifutshane

Akukho dathaI-engile ephezuluMax ngaphandle kwenqwelo-moya
QP
isiqingatha sesine12
Isihlanu ukuya kwesi-sibhozo24
ishumi ukuya kwezilishumi elinesibini35
14 ukuya kwi-1637
18 ukuya kuma-24410
26 ukuya kuma-30510
Amashumi amathathu anesibini ukuya kwamashumi amane anesibini513
44 a 48520

ASME B16.9 Iintlobo ezifumanekayo ze-Buttweld Short Stub End

Isiphelo Esifutshane Esidibaniswe NgokushisaIziphelo ezimfutshane ezidityaniswe ngokubethelelwa
ASME B16.9 Ukudibanisa ngokushisa isiphelo esifutshane se-stubIzifakelo zocingo lwentsimbi ezimfutshane ezinemiphetho emifutshane
Abaxhasi be-Stub End emfutshane yentsimbi engatyiwayoI-SS Buttweld yokufaka iiphelo ezimfutshane ezingqukuva
ANSI B16.9 Umthengisi we-Buttweld Short Stub EndUmthumeli phesheya wee-ASME B16.28 Buttweld Short Stub Ends
Ukuqhagamshelwa ngokufudumeza iimpembelelo ezimfutshane ezinesiphelo esifutshane UmthengisiAbahambisi be-Short Stub End bokutsalela okungenamthungo
Intsimbi yekhabhoni isiphelo esifutshane esigobileyoUmvelisi we-Short Stub End okumgangatho ophezulu
Ii-ASTM A403 ezimfutshane ze-Stub Ends zentsimbi engatyiwayoI-Duplex yentsimbi, i-Buttweld, i-Short Stub End
Intsimbi yeSuper Duplex edibene ngokuqhushumbisa, enesiphelo esifutshane esingqukuvaIsiphelo Esifutshane seCopper Nickel
Iziphelo ezimfutshane ze-alloy enenikeli ephezuluUmthengisi weHastelloy Short Stub Ends
Isiphelo esifutshane se-Titanium esidityaniswa ngobushushuInconel iweldi yomqolo isiphelo esifutshane esigqithisiweyo

 

 Isicelo Sokuphelisa Isithuba Esifutshane

  • Isiphelo Esimfutshane Esinqunqweyo Sentsimbi Engatyiwayo Esidityaniswa Ngokubutwela sisetyenziswa kwipayipi ye-oyile negesi.
  • I-Butt weld Short Stub Ends isetyenziswa kwiShishini leeKhemikhali
  • Iziphelo ezimfutshane ze-Alloy Steel ezisetyenziswa kwiipayipi
  • Ii-Buttweld Short Stub Ends zisetyenziswa kuKufudumeza
  • Izifakelo ezimfutshane ezinesiphelo esigobileyo ezidityaniswa ngokuncanyathiselwa kusetyenziswa kwiinkqubo zokunikezela ngamanzi
  • I-ANSI B16.9 Buttweld Short Stub Ends isetyenziswa kwiZikhululo zombane
  • Isinxibo esifutshane esinqamlezayo esidityaniswa ngokuncanyathiselwa kusetyenziswa kwishishini lephepha nepulp.
  • Ukusetyenziswa kwe-Short Stub End kwiZicelo eziQhelekileyo
  • Isetyenziswa kwi-Buttweld Short Stub End kushishino lokwenziwa kwezinto.
  • Ukusetyenziswa kwe-Short Stub End kushishino lokulungisa ukutya
  • Ii-Buttweld Short Stub Ends zisetyenziswa kwiipayipi zesakhiwo.
Ii-tags:

Ngaphambili:

Okulandelayo:

Iimveliso ezinxulumeneyo

Shiya impendulo

+86-577-85980211

+8613587625968

306208216

Shiya umyalezo

    Nceda ubonise ukuba ungumntu ngokukhetha i ikomityi.