Wenzhou Kaixin Kaixin Metaal Maatskappy, Beperk
Wat is vlekvrye staal butt-weld swage-nipple?
Roestvrye staal buttweld swage-nippels is fittings wat gebruik word om twee pype van verskillende groottes aan mekaar te koppel of om die deursnee van 'n pyp te verminder. Hulle het aan een kant 'n buttweld-verbinding en aan die ander kant 'n geskroefde of gladde punt. Hulle is gemaak van hoëgehalte vlekvrye staal, wat hulle korrosiebestand maak en geskik vir gebruik in moeilike omgewings. Hulle kom in verskillende groottes en afwerkings voor om by verskillende pyptoepassings te pas.
Roestvrye staal butt-weld swage-nippels word algemeen gebruik in nywerhede soos olie en gas, chemiese verwerking en waterbehandeling. Hulle is ideaal vir toepassings wat hoë druk en hoë temperatuur vereis. Hul ontwerp maak dit moontlik om dit maklik te installeer en te verwyder, wat hulle ideaal maak vir onderhoud- en herstelwerk.
Oor die algemeen is vlekvrye staal butt-weld swage-nipels 'n betroubare en duursame opsie om pype in verskeie pyptoepassings te verbind en te verminder.
Spesifikasies van ASME B16.9 buttlas-swage-nipple
| Groottes | 1/8″ tot 8″, (DN8 tot DN200) |
| Standaarde | ANSI/ASME :ASTM A403 / ASME SA403, ANSI B16.9, ASME B16.25, ASME B16.28, MSS SP-43.DIN : DIN2605, DIN2615, DIN2616, DIN2617, DIN28011, EN : EN10253-1, EN10253-2 |
| Afmetings | ASME/ANSI B16.9, MSS-SP-43 Tipe A, MSS-SP-43 Tipe B, JIS B2312, JIS B2313, ASME B16.28 |
| Dikheid | Bylae 5S, 10S, 20S, S10, S20, S30, STD, 40S, S40, S60, XS, 80S, S80, S100, S120, S140, S160, XXS en ens. |
| Buigradius | R=1D – 10D, 15D, 20D |
| Van | Koniese swage-tepel, eksentriese swage-tepel |
| Grade&Materiaal | ASTM A403 WP Gr. 304, 304L, 304H, 310, 316, 316L, 316H, 316Ti, 317L, 321, 347, 904L, ASTM A234 WPB, WPBW, WPHY 70, WPHY 65, WPHY 60, WPHY 52, WPHY 46, & WPHY 42.ASTM A420 WPL6, ASTM A420 WPL3, ASTM / ASME A/SA 234 Gr. WP1, WP5, WP9, WP11, WP12, WP22, WP91, ASTM A815, ASME SA815 UNS NO S31803, UNS NO S32205, UNS S32750, UNS S32950. Werkstoff Nr. 1.4462, UNS 10276 (HASTELLOY C 276), UNS 6625 (INCONEL 625), UNS 6601 (INCONEL 601), UNS 6600 (INCONEL 600), UNS 8825 (INCONEL 825), UNS 8020 (ALLOY 20 / 20 CB 3), UNS 4400 (MONEL 400), UNS 2201 (NIKKEL 201), ASTM / ASME SB 336 UNS 2200 (NIKKEL 200) |
| Tipe | Staartlas (BW) |
Standaarde vir vervaardiging van butt-gesmede Swedge-nippels
| ASME-standaard | ASME/ANSI B16.9, ASME/ANSI B16.28, MSS-SP-43 |
| DIN-standaard | DIN28011, DIN2617, DIN2616, DIN2615, DIN2605 |
| EN-standaard | EN10253-2, EN10253-1 |
| ASME B16.25 | Lasnoppe van eindes |
| ASME B16.9 | Fabrieksvervaardigde gloeifittings lasverbinding deur staartlas |
| ASME B16.28 | Gegote staal eksentrieke redukteur |
| ASTM A403 – ASME SA403 | Standaardspesifikasie vir gegote austenitiese vlekvrye staal-pypbeslag |
| MSS SP-43 | Gegote en vervaardigde staartlasverbinding vir laedruk, korrosiebestande toepassings |
Materiale en grade van buttweld-swedge-nippels
| Roestvrye staal butt-weld swedge-nipsel |
| ASTM A403 WP Gr. 304, 304L, 304H, 310, 316, 316L, 316H, 316Ti, 317L, 321, 347, 904L |
| Koolstofstaal buttlas-swedge-nipsel |
| ASTM A234 WPB, WPBW, WPHY 70, WPHY 65, WPHY 60, WPHY 52, WPHY 46, & WPHY 42. |
| Lae temperatuur-boutgeswede T-stuk met swedge-draad |
| ASTM A420 WPL6, ASTM A420 WPL3 |
| Legeringsstaal-swedge-tussel vir buttweld |
| ASTM / ASME A/SA 234 Gr. WP1, WP5, WP9, WP11, WP12, WP22, WP91 |
| Duplex- en superduplex-staal-buttweld-swedge-nipsel |
| ASTM A815, ASME SA815 UNS NO S31803, UNS NO S32205, UNS S32750, UNS S32950. Werkstoff nr. 1.4462 |
| Nikkellegerings-swedge-tussenstuk vir buttlas |
| UNS 10276 (HASTELLOY C 276), UNS 6625 (INCONEL 625), UNS 6601 (INCONEL 601), UNS 6600 (INCONEL 600), UNS 8825 (INCONEL 825), UNS 8020 (ALLOY 20 / 20 CB 3), UNS 4400 (MONEL 400), UNS 2201 (NIKKEL 201), ASTM / ASME SB 336 UNS 2200 (NIKKEL 200) |
SWAGE-NIPPELAFMETINGS :
SWAGE-NIPPELAFMETINGS
Naadlose Swage-nippels
| I.D. of nominale grootte | Buitediameter | Lengte | ||
| Nou | Egter Egte Uitbarsting | Nou | Egter Egte Uitbarsting | |
| 1/8 | — | — | — | — |
| 1/4 | .540 | — | 2 1/4 | — |
| 3/8 | .675 | — | 2 1/2 | — |
| 1/2 | .840 | — | 2 3/4 | — |
| 3/4 | 1.050 | — | 3 | — |
| 1 | 1.315 | 1.469 | 3 1/2 | 4 1/2 |
| 1 1/4 | 1.660 | 1.812 | 4 | 6 |
| 1 1/2 | 1.900 | 2.094 | 4 1/2 | 6 |
| 2 | 2.375 | 2.594 | 6 1/2 | 8 |
| 2 1/2 | 2.875 | 3.094 | 7 | 8 |
| 3 | 3.500 | 3.750 | 8 | 8 |
| 3 1/2 | 4.000 | 4.250 | 8 | 8 |
| 4 | 4.500 | 4.750 | 9 | 9 |
ASME B16.9 stuitlas-swedge-nipselafmetings
| Nominal pypgrootte (NPS) | Buitediameter | Einde tot einde “A” | Muurdikte | ||||||||
| Groot eind D1 | Klein eind D2 | T1 | T2 | ||||||||
| Sk40 (STD) | Skool 80 (XXS) | Skool 160 | XXS | Sk40 (STD) | Skool 80 (XXS) | Skool 160 | XXS | ||||
| 1/4”x1/8” | 13.7 | 10.3 | 57 | 2.2 | 3.0 | 3.7 | 6.1 | 1.7 | 2.4 | ||
| 3/8”x1/8” | 17.1 | 10.3 | 64 | 2.3 | 3.2 | 4.0 | 6.4 | 1.7 | 2.4 | ||
| 3/8”x1/4” | 17.1 | 13.7 | 64 | 2.3 | 3.2 | 4.0 | 6.4 | 2.2 | 3.0 | ||
| 1/2”x1/8” | 21.3 | 10.3 | 70 | 2.8 | 3.7 | 4.8 | 7.5 | 1.7 | 2.4 | ||
| 1/2”x1/4” | 21.3 | 13.7 | 70 | 2.8 | 3.7 | 4.8 | 7.5 | 2.2 | 3.0 | ||
| 1/2”x3/8” | 21.3 | 17.1 | 70 | 2.8 | 3.7 | 4.8 | 7.5 | 2.3 | 3.2 | ||
| 3/4”x1/8” | 26.7 | 10.3 | 76 | 2.9 | 3.9 | 5.6 | 7.8 | 1.7 | 2.4 | ||
| 3/4 duim x 1/4 duim’ | 26.7 | 13.7 | 76 | 2.9 | 3.9 | 5.6 | 7.8 | 2.2 | 3.0 | ||
| 3/4”x3/8” | 26.7 | 17.1 | 76 | 2.9 | 3.9 | 5.6 | 7.8 | 2.3 | 3.2 | ||
| 3/4”x1/2” | 26.7 | 21.3 | 76 | 2.9 | 3.9 | 5.6 | 7.8 | 2.8 | 3.7 | 4.8 | 7.5 |
| 1”x1/8” | 33.4 | 10.3 | 89 | 3.4 | 4.5 | 6.4 | 9.1 | 1.7 | 2.4 | ||
| 1”x1/4” | 33.4 | 13.7 | 89 | 3.4 | 4.5 | 6.4 | 9.1 | 2.2 | 3.0 | ||
| 1”x3/8” | 33.4 | 17.1 | 89 | 3.4 | 4.5 | 6.4 | 9.1 | 2.3 | 3.2 | ||
| 1”x1/2” | 33.4 | 21.3 | 89 | 3.4 | 4.5 | 6.4 | 9.1 | 2.8 | 3.7 | 4.8 | 7.5 |
| 1”x3/4” | 33.4 | 26.7 | 89 | 3.4 | 4.5 | 6.4 | 9.1 | 2.9 | 3.9 | 5.6 | 7.8 |
| 1-1/4”x1/8” | 42.2 | 10.3 | 102 | 3.6 | 4.9 | 6.4 | 9.7 | 1.7 | 2.4 | ||
| 1-1/4”x1/4” | 42.2 | 13.7 | 102 | 3.6 | 4.9 | 6.4 | 9.7 | 2.2 | 3.0 | ||
| 1-1/4”x3/8” | 42.2 | 17.1 | 102 | 3.6 | 4.9 | 6.4 | 9.7 | 2.3 | 3.2 | ||
| 1-1/4”x1/2” | 42.2 | 21.3 | 102 | 3.6 | 4.9 | 6.4 | 9.7 | 2.8 | 3.7 | 4.8 | 7.5 |
| 1-1/4”x3/4” | 42.2 | 26.7 | 102 | 3.6 | 4.9 | 6.4 | 9.7 | 2.9 | 3.9 | 5.6 | 7.8 |
| 1-1/4”x1” | 42.2 | 33.4 | 102 | 3.6 | 4.9 | 6.4 | 9.7 | 3.4 | 4.5 | 6.4 | 9.1 |
| 1½ duim x 1/8 duim” | 48.3 | 10.3 | 114 | 3.7 | 5.1 | 7.1 | 10.2 | 1.7 | 2.4 | ||
| 1½ duim x ¼ duim” | 48.3 | 13.7 | 114 | 3.7 | 5.1 | 7.1 | 10.2 | 2.2 | 3.0 | ||
| 1½ duim x 3/8 duim” | 48.3 | 17.1 | 114 | 3.7 | 5.1 | 7.1 | 10.2 | 2.3 | 3.2 | ||
| 1½ duim x ½ duim” | 48.3 | 21.3 | 114 | 3.7 | 5.1 | 7.1 | 10.2 | 2.8 | 3.7 | 4.8 | 7.5 |
| 1½ duim x ¾ duim” | 48.3 | 26.7 | 114 | 3.7 | 5.1 | 7.1 | 10.2 | 2.9 | 3.9 | 5.6 | 7.8 |
| 1½ duim x 1 duim” | 48.3 | 33.4 | 114 | 3.7 | 5.1 | 7.1 | 10.2 | 3.4 | 4.5 | 6.4 | 9.1 |
| 1-1/2”x1-1/4” | 48.3 | 42.2 | 114 | 3.7 | 5.1 | 7.1 | 10.2 | 3.6 | 4.9 | 6.4 | 9.7 |
| 2”x1/8” | 60.3 | 10.3 | 165 | 3.9 | 5.5 | 8.7 | 11.1 | 1.7 | 2.4 | ||
| 2 duim x 1/4 duim” | 60.3 | 13.7 | 165 | 3.9 | 5.5 | 8.7 | 11.1 | 2.2 | 3.0 | ||
| 2”x3/8” | 60.3 | 17.1 | 165 | 3.9 | 5.5 | 8.7 | 11.1 | 2.3 | 3.2 | ||
| 2 duim x 1/2 duim” | 60.3 | 21.3 | 165 | 3.9 | 5.5 | 8.7 | 11.1 | 2.8 | 3.7 | 4.8 | 7.5 |
Concentric Swage-nipselafmetings
| NPS | O.D. | Einde tot einde “A” | Dikte van muur | ||||||||
| Groot eind D1 | Klein eind D2 | T1 | T2 | ||||||||
| Skedule 40 (STD) | Skedule 80 (XS) | Skedule 160 | XXS | Skedule 40 (STD) | Skedule 80 (XS) | Skedule 160 | XXS | ||||
| 2 duim x 3/4 duim” | 60.3 | 26.7 | 165 | 3.9 | 5.5 | 8.7 | 11.1 | 2.9 | 3.9 | 5.6 | 7.8 |
| 2 duim x 1 duim” | 60.3 | 33.4 | 165 | 3.9 | 5.5 | 8.7 | 11.1 | 3.4 | 4.5 | 6.4 | 9.1 |
| 2”x1-1/4” | 60.3 | 42.2 | 165 | 3.9 | 5.5 | 8.7 | 11.1 | 3.6 | 4.9 | 6.4 | 9.7 |
| 2 duim x 1½ duim” | 60.3 | 48.3 | 165 | 3.9 | 5.5 | 8.7 | 11.1 | 3.7 | 5.1 | 7.1 | 10.2 |
| 2-1/2”x1/8” | 73.0 | 10.3 | 178 | 5.2 | 7.0 | 9.5 | 14.0 | 1.7 | 2.4 | ||
| 2-1/2”x1/4” | 73.0 | 13.7 | 178 | 5.2 | 7.0 | 9.5 | 14.0 | 2.2 | 3.0 | ||
| 2-1/2”x3/8” | 73.0 | 17.1 | 178 | 5.2 | 7.0 | 9.5 | 14.0 | 2.3 | 3.2 | ||
| 2-1/2”x1/2” | 73.0 | 21.3 | 178 | 5.2 | 7.0 | 9.5 | 14.0 | 2.8 | 3.7 | 4.8 | 7.5 |
| 2-1/2”x3/4” | 73.0 | 26.7 | 178 | 5.2 | 7.0 | 9.5 | 14.0 | 2.9 | 3.9 | 5.6 | 7.8 |
| 2-1/2”x1” | 73.0 | 33.4 | 178 | 5.2 | 7.0 | 9.5 | 14.0 | 3.4 | 4.5 | 6.4 | 9.1 |
| 2-1/2”x1-1/4” | 73.0 | 42.2 | 178 | 5.2 | 7.0 | 9.5 | 14.0 | 3.6 | 4.9 | 6.4 | 9.7 |
| 2-1/2”x1-1/2” | 73.0 | 48.3 | 178 | 5.2 | 7.0 | 9.5 | 14.0 | 3.7 | 5.1 | 7.1 | 10.2 |
| 2-1/2”x2” | 73.0 | 60.3 | 178 | 5.2 | 7.0 | 9.5 | 14.0 | 3.9 | 5.5 | 8.7 | 11.1 |
| 3 duim x 1/8 duim” | 88.9 | 10.3 | 203 | 5.5 | 7.6 | 11.1 | 15.2 | 1.7 | 2.4 | 3.2 | 4.8 |
| 3”x1/4” | 88.9 | 13.7 | 203 | 5.5 | 7.6 | 11.1 | 15.2 | 2.2 | 3.0 | 3.7 | 6.1 |
| 3 duim x 3/8 duim” | 88.9 | 17.1 | 203 | 5.5 | 7.6 | 11.1 | 15.2 | 2.3 | 3.2 | 4.0 | 6.4 |
| 3 duim x 1/2 duim” | 88.9 | 21.3 | 203 | 5.5 | 7.6 | 11.1 | 15.2 | 2.8 | 3.7 | 4.8 | 7.5 |
| 3 duim x 3/4 duim” | 88.9 | 26.7 | 203 | 5.5 | 7.6 | 11.1 | 15.2 | 2.9 | 3.9 | 5.6 | 7.8 |
| 3 duim x 1 duim” | 88.9 | 33.4 | 203 | 5.5 | 7.6 | 11.1 | 15.2 | 3.4 | 4.5 | 6.4 | 9.1 |
| 3”x1-1/4” | 88.9 | 42.2 | 203 | 5.5 | 7.6 | 11.1 | 15.2 | 3.6 | 4.9 | 6.4 | 9.7 |
| 3 duim x 1½ duim” | 88.9 | 48.3 | 203 | 5.5 | 7.6 | 11.1 | 15.2 | 3.7 | 5.1 | 7.1 | 10.2 |
| 3”x2” | 88.9 | 60.3 | 203 | 5.5 | 7.6 | 11.1 | 15.2 | 3.9 | 5.5 | 8.7 | 11.1 |
| 3”x2-1/2” | 88.9 | 73.0 | 203 | 5.5 | 7.6 | 11.1 | 15.2 | 5.2 | 7.0 | 9.5 | 14.0 |
| 3-1/2”x1/8” | 101.6 | 10.3 | 203 | 5.7 | 8.1 | 1.7 | 2.4 | ||||
| 3½ duim x ¼ duim” | 101.6 | 13.7 | 203 | 5.7 | 8.1 | 2.2 | 3.0 | ||||
| 3-1/2”x3/8” | 101.6 | 17.1 | 203 | 5.7 | 8.1 | 2.3 | 3.2 | ||||
| 3½ duim x ½ duim” | 101.6 | 21.3 | 203 | 5.7 | 8.1 | 2.8 | 3.7 | 4.8 | 7.5 | ||
| 3½ duim x ¾ duim” | 101.6 | 26.7 | 203 | 5.7 | 8.1 | 2.9 | 3.9 | 5.6 | 7.8 | ||
| 3½ duim x 1 duim” | 101.6 | 33.4 | 203 | 5.7 | 8.1 | 3.4 | 4.5 | 6.4 | 9.1 | ||
| 3-1/2”x1-1/4” | 101.6 | 42.2 | 203 | 5.7 | 8.1 | 3.6 | 4.9 | 6.4 | 9.7 | ||
ANSI B16.11-gesmede, gevlense draad-swage-nipsel val onder die standaard met 'n maksimum deursnee van 4 duim. Verskillende materiaal-aansluitings, soos die ASTM A182 SS-gevlense draad-swage-nipsels, is op die mark beskikbaar.
Eksentriese swage-tepelafmetings
| NPS | O.D. | Einde tot einde “A” | Dikte van muur | ||||||||
| Groot eind D1 | Klein eind D2 | T1 | T2 | ||||||||
| Skedule 40 (STD) | Skedule 80 (XS) | Skedule 160 | XXS | Skedule 40 (STD) | Skedule 80 (XS) | Skedule 160 | XXS | ||||
| 3-1/2”x1-1/2” | 101.6 | 48.3 | 203 | 5.7 | 8.1 | 3.7 | 5.1 | 7.1 | 10.2 | ||
| 3-1/2”x2” | 101.6 | 60.3 | 203 | 5.7 | 8.1 | 3.9 | 5.5 | 8.7 | 11.1 | ||
| 3-1/2”x2-1/2” | 101.6 | 73.0 | 203 | 5.7 | 8.1 | 5.2 | 7.0 | 9.5 | 14.0 | ||
| 3½ duim x 3 duim” | 101.6 | 88.9 | 203 | 5.7 | 8.1 | 5.5 | 7.6 | 11.1 | 15.2 | ||
| 4”x1/4” | 114.3 | 13.7 | 229 | 6.0 | 8.6 | 13.5 | 17.1 | 2.2 | 3.0 | ||
| 4”x3/8” | 114.3 | 17.1 | 229 | 6.0 | 8.6 | 13.5 | 17.1 | 2.3 | 3.2 | ||
| 4 duim x 1/2 duim” | 114.3 | 21.3 | 229 | 6.0 | 8.6 | 13.5 | 17.1 | 2.8 | 3.7 | 4.8 | 7.5 |
| 4”x3/4” | 114.3 | 26.7 | 229 | 6.0 | 8.6 | 13.5 | 17.1 | 2.9 | 3.9 | 5.6 | 7.8 |
| 4 duim x 1 duim” | 114.3 | 33.4 | 229 | 6.0 | 8.6 | 13.5 | 17.1 | 3.4 | 4.5 | 6.4 | 9.1 |
| 4”x1-1/4” | 114.3 | 42.2 | 229 | 6.0 | 8.6 | 13.5 | 17.1 | 3.6 | 4.9 | 6.4 | 9.7 |
| 4 duim x 1½ duim” | 114.3 | 48.3 | 229 | 6.0 | 8.6 | 13.5 | 17.1 | 3.7 | 5.1 | 7.1 | 10.2 |
| 4”x2” | 114.3 | 60.3 | 229 | 6.0 | 8.6 | 13.5 | 17.1 | 3.9 | 5.5 | 8.7 | 11.1 |
| 4”x2-1/2” | 114.3 | 73.0 | 229 | 6.0 | 8.6 | 13.5 | 17.1 | 5.2 | 7.0 | 9.5 | 14.0 |
| 4”x3” | 114.3 | 88.9 | 229 | 6.0 | 8.6 | 13.5 | 17.1 | 5.5 | 7.6 | 11.1 | 15.2 |
| 4”x3-1/2” | 114.3 | 101.6 | 229 | 6.0 | 8.6 | 13.5 | 17.1 | 5.7 | 8.1 | ||
ASME B16.9 Swedge-nipsel afmetingstoleransie
Afmetingstoleransies is in millimeters, tensy anders aangedui, en is gelyk aan ±, behalwe soos aangetoon.
MSS SP-43 dek slegs vlekvrye staal butt-weld-fittings wat ontwerp is vir gebruik met Schedule 5S en 10S Swedge Nipple, geskik vir gebruik met Schedule 40S-pyp, soos uiteengesit in ASME B36.19. Die skaal en dimensionele toleransies soos uiteengesit in MSS SP-43 is in groot mate soortgelyk aan dié in ASME B16.9-spesifikasies van NPS 1/2 tot NPS 24. Behalwe met betrekking tot die buitendiameter by die skuinskant.
| Nominal pypgrootte (duim) | Totale lengte (mm) | Buitediameter aan die einde | Muurdikte (voor draadtrek of groefwerk) | |
| Vierkantig gesnyde eindes (mm) | Ander eindverbinding (mm) | |||
| 1/8” tot 3/8” | ± 1,5 | + 0.40 – 0.80 | ± 0.80 | Nie minder as 87,51 TP3T van die nominale muurdikte |
| ½ duim tot 1½ duim” | ± 1,5 | + 0.40 – 0.80 | + 1.50 – 0.80 | |
| 2” tot 2-1/2” | ± 3.0 | ± 0.80 | + 1.50 – 0.80 | |
| 3 duim tot 4 duim” | ± 3.0 | ± 0.80 | ± 1.50 | |
ASME B16.9 Stomplas-swedge-nipsel gewigskema
| Grootte | Muurdikte | |||||||
| T1 | T2 | |||||||
| Sk40 (STD) | Skool 80 (XXS) | Skool 160 | XXS | Sk40 (STD) | Skool 80 (XXS) | Skool 160 | XXS | |
| 3-1/2”x1-1/2” | 5.7 | 8.1 | 3.7 | 5.1 | 7.1 | 10.2 | ||
| 3-1/2”x2” | 5.7 | 8.1 | 3.9 | 5.5 | 8.7 | 11.1 | ||
| 3-1/2”x2-1/2” | 5.7 | 8.1 | 5.2 | 7.0 | 9.5 | 14.0 | ||
| 3½ duim x 3 duim” | 5.7 | 8.1 | 5.5 | 7.6 | 11.1 | 15.2 | ||
| 4”x1/4” | 6.0 | 8.6 | 13.5 | 17.1 | 2.2 | 3.0 | ||
| 4”x3/8” | 6.0 | 8.6 | 13.5 | 17.1 | 2.3 | 3.2 | ||
| 4 duim x 1/2 duim” | 6.0 | 8.6 | 13.5 | 17.1 | 2.8 | 3.7 | 4.8 | 7.5 |
| 4”x3/4” | 6.0 | 8.6 | 13.5 | 17.1 | 2.9 | 3.9 | 5.6 | 7.8 |
| 4 duim x 1 duim” | 6.0 | 8.6 | 13.5 | 17.1 | 3.4 | 4.5 | 6.4 | 9.1 |
| 4”x1-1/4” | 6.0 | 8.6 | 13.5 | 17.1 | 3.6 | 4.9 | 6.4 | 9.7 |
| 4 duim x 1½ duim” | 6.0 | 8.6 | 13.5 | 17.1 | 3.7 | 5.1 | 7.1 | 10.2 |
| 4”x2” | 6.0 | 8.6 | 13.5 | 17.1 | 3.9 | 5.5 | 8.7 | 11.1 |
| 4”x2-1/2” | 6.0 | 8.6 | 13.5 | 17.1 | 5.2 | 7.0 | 9.5 | 14.0 |
| 4”x3” | 6.0 | 8.6 | 13.5 | 17.1 | 5.5 | 7.6 | 11.1 | 15.2 |
| 4”x3-1/2” | 6.0 | 8.6 | 13.5 | 17.1 | 5.7 | 8.1 | ||
ASME B16.9 SS Swedge-nipsel hoekigheidstoleransie
| ND | Maksimum afhoek | Maks van die vliegtuig af |
| Q | P | |
| 1/2 'n 4 | 1 | 2 |
| 5 tot 8 | 2 | 4 |
| 10 tot 12 | 3 | 5 |
| 14 tot 16 | 3 | 7 |
| 18 tot 24 | 4 | 10 |
| 26 tot 30 | 5 | 10 |
| 32 tot 42 | 5 | 13 |
| 44 tot 48 | 5 | 20 |
Toepassings van ASME B 16.9 buttlas-swedge-nipple
- ASME B 16.9 buttlas-geswede nippels wat gebruik word in chemiese en petrochemiese verwerking
- ASME B 16.9 buttlas-swedge-nipple wat in raffinaderye gebruik word
- ASME B 16.9 buttlas-swedge-nipple wat in elektronika gebruik word
- ASME B 16.9 buttlas-swedge-nipels gebruik in kunsmis
- ASME B 16.9 buttlas-swedge-nipple wat in kragstasies gebruik word
- ASME B 16.9 buttlas-swedge-nipple wat in kernkrag gebruik word
- ASME B 16.9 buttlas-swedge-nipple wat in olie en gas gebruik word
ASME B 16.9 buttlas-swedge-nipple wat in papierbedrywe gebruik word
English
Afrikaans
Arabic
Bengali
Catalan
Chinese
French
Dutch (Belgium)
Dutch
German
Czech
Greek
Hindi
Japanese
Italian
Portuguese
Spanish (Chile)
Spanish (Colombia)
Spanish (Argentina)
Persian
Estonian
Albanian
Russian
Spanish (Peru)
Indonesian
Thai
Vietnamese
Georgian
Bhojpuri
Moroccan Arabic
Korean
Nepali
Polish
Ukrainian
Malayalam
Xhosa