Wenzhou Kaixin Kaixin Metaal Maatskappy, Beperk
Bend is a generic term for any offset or change of direction in the pipe fittings. Bends are generally manufactured as per the needs of the piping applications. These do not have sharp corners. Bending methods have constraint as to how much material thinning can be allowed to safely deal with the pressure of the fluid to be contained. Bends are used to bend the pipes as there is no welding required. There is less friction and the flow is smoother. It has a larger radius. Generally, the most basic difference is the radius of curvature. It has a radius of curvature more than twice the diameter.
These are formed while performing all standard manufacturing process to deliver products as per the industrial norms. It has higher resistance against mild corrosive media.
The industrial bend have good performance in the environments where pitting and crevice corrosion is a concern. It is made up of the high thermal stable material which allows using in the higher temperature applications even without deformation. Its design is leakage and joint free allows using in the higher pressure applications. It has a rugged construction, uniform design, sturdy finish, and more other features.
BUTT WELD BEND SPECIFICATION
| Groottes | 1/2” TO 36”, (Seamless up to 24”), (Welded 8” TO 36”) |
| Standaarde | ANSI/ASME :ASTM A403 / ASME SA403, ANSI B16.9, ASME B16.25, ASME B16.28, MSS SP-43. DIN : DIN2605, DIN2615, DIN2616, DIN2617, DIN28011 EN : EN10253-1, EN10253-2N 1.4404, 304H, 309, 310, 316, 316L, 317L, 321, 347, 904L，WPBW, WPHY 42, WPHY 46, WPHY 52, WPH 60, WPHY 65 & WPHY 70. |
| Afmetings | ASME/ANSI B16.9, MSS-SP-43 Tipe A, MSS-SP-43 Tipe B, JIS B2312, JIS B2313, ASME B16.28 |
| Skedule | Bylae 5S, 10S, 20S, S10, S20, S30, STD, 40S, S40, S60, XS, 80S, S80, S100, S120, S140, S160, XXS en ens. |
| Buigradius | R=1D – 10D, 15D, 20D |
| Van | Bend, Butt weld Bend, Fitting Bend |
| Materiaal | 304/L/H/LN, 316/L/H/LN/Ti, 321/H, 317/L/LN, 347/H, 310S/H, N08904(904L), S31803,S32205, S32750, S32760, N02200, N02201, N04400, N06600, N06690, N06625, N06985(G3), N08028, N08800, N08810, N08811, N08825 Oppervlak, Monel, Nikkel, Inconel, Hastalloy, Titanium, Tantaal, Vlekvrye Staal, Legeringstaal, Koolstofstaal, Cupro-Nikkel 90/10 & 70/30, Vlekvrye Staal ASME / ASTM SA / A403 SA / A 774 WP-S, WP-W, WP-WX, DIN 1.4301, DIN1.4306, DIN 1.4401, DIN 1.4404 |
| Tipe | Stomplas (BW) / Gesweis / ERW / Vervaardig |
| SS Smeltpunte | 1400-1450°C (WP304, WP304L), 1390-1440°C (WP316L), 1370 – 1400°C (WP316) |
Butt weld Bend Manufacturing Standards
| ASME-standaard | ASME/ANSI B16.9, ASME/ANSI B16.28, MSS-SP-43 |
| DIN-standaard | DIN28011, DIN2617, DIN2616, DIN2615, DIN2605 |
| EN-standaard | EN10253-2, EN10253-1 |
| ASME B16.25 | Lasnoppe van eindes |
| ASME B16.9 | Fabrieksvervaardigde gloeifittings lasverbinding deur staartlas |
| ASME B16.28 | Wrought Steel Bend and Buttwelding Returns |
| ASTM A403 – ASME SA403 | Standard Specification for Wrought Austenitic SS Piping Fitting |
| MSS SP-43 | Gegote en vervaardigde staartlasverbinding vir laedruk, korrosiebestande toepassings |
Butt weld Bend Materials and Grades
| Stainless Steel Welded Pipe Bend | ASTM A403 WP316/316L, ASTM A403 SA / A 774 WP-S, WP-W, WP-WX 304/304L, ASTM A182 F316L, 304L, DIN 1.4301, DIN1.4306, DIN 1.4401, DIN 1.4404 |
| Duplex & Super Duplex Steel Welded Pipe Bend | ASTM A 815, ASME SA 815 UNS NO S31803, S32205. UNS S32750, S32950. Werkstof No 1.4462 |
| Carbon Steel Welded Pipe Bend | ASTM A234, ASME SA234 WPB, WPBW, WPHY 42, WPHY 46, WPHY 52, WPH 60, WPHY 65 en WPHY 70. |
| Low Temperature Carbon Steel Welded Pipe Bend | ASTM A420 WPL3, A420 WPL6 |
| Alloy Steel Welded Pipe Bend | ASTM / ASME A/SA 234 Gr. WP 1, WP 5, WP 9, WP 11, WP 12, WP 22, WP 91 |
| Nickel Alloy Welded Pipe Bend | ASTM B336, ASME SB336, Nikkel 200 (UNS Nr. Nr. 2200), Nikkel 201 (UNS Nr. N02201), Monel 400 (UNS Nr. N04400), Monel 500 (UNS Nr. N05500), Inconel 800 (UNS Nr. N08800), Inconel 825 (UNS Nr. N08825), Inconel 600 (UNS Nr. N06600), Inconel 625 (UNS Nr. N06625), Inconel 601 (UNS Nr. N06601), Hastelloy C 276 (UNS Nr. N10276), Legering 20 (UNS Nr. N08020), Titanium (Graad I & II), Cupro-Nikkel 70/30, CuNi10Fe1Mn, CuNi30Mn1Fe. |
ANSI B16.9 WELDED PIPE BEND APPLICATION INDUSTRIES
ASME/ANSI B16.9 Welded Bend are known to deliver exceptional performance and are generally developed for meeting the demands. We supply a wide range of Buttweld Welded Pipe Bends through a worldwide network of stock-keeping branches. These Welded Bends is uses in various industries According to needs. Most Common Indusctris are:
- Steel Pipe Welded Bend uses in Oil and Gas Pipeline
- Alloy Steel Welded Pipe Bend uses in Chemical Industry
- Butt weld Welded Pipe Bend uses in Plumbing
- Buttweld Welded Bends uses in Food Processing Industry
- Welded Bends uses in Structural Pipe
- ANSI B16.9 Buttweld Welded Bend uses in Power Plant
- Stainless Steel Buttweld Welded Bends uses in Paper & Pulp Industry
- ASME B16.28 Welded Bends uses in Heating
- Welded Bend uses in Water Supply Systems
- Butt weld Welded Bends uses in Fabrication Industry
- ASME B16.9 Welded Bend uses in General Purpose Applications
ASME B16.9 Butt weld Bend Dimensions
| Dimension: | ANSI B16.9, ANSI B16.28, MSS-SP-43 Tipe A, MSS-SP-43 Tipe B, JIS B2312, JIS B2313 |
| Available Radius | · 3D Bend · 5D Bend · 6D Bend · 8D Bend · 10D Bend · 20D Bend · Customized radius |
ASME B16.9 Buttweld Bend Weight Chart
| NPS duim | STUB ENDS | |||
| Skool. 5S | Skool. 10 Sekondes | Skool. 40's | Skool. 80's | |
| 1/2 | 0.06 | 0.08 | 0.12 | 0.13 |
| 3/4 | 0.07 | 0.09 | 0.15 | 0.17 |
| 1 | 0.09 | 0.15 | 0.20 | 0.25 |
| 1 1/4 | 0.13 | 0.20 | 0.30 | 0.35 |
| 1 1/2 | 0.16 | 0.25 | 0.38 | 0.46 |
| 2 | 0.25 | 0.40 | 0.55 | 0.75 |
| 2 1/2 | 0.35 | 0.50 | 0.80 | 1.00 |
| 3 | 0.50 | 0.60 | 1.10 | 1.50 |
| 4 | 0.70 | 1.00 | 1.80 | 2.50 |
| 5 | 1.00 | 1.25 | 2.50 | 3.50 |
| 6 | 1.60 | 1.95 | 3.70 | 5.50 |
| 8 | 2.50 | 3.10 | 5.90 | 10.0 |
| 10 | 4.00 | 4.90 | 10.5 | 14.0 |
| 12 | 6.60 | 7.10 | 15.0 | 20.0 |
| 14 | 6.40 | 7.80 | 15.5 | 20.5 |
| 16 | 7.90 | 9.00 | 18.0 | 24.0 |
| 18 | 9.30 | 10.5 | 21.0 | 28.0 |
| 20 | 12.0 | 13.5 | 23.5 | 31.0 |
| 24 | 16.5 | 19.0 | 28.5 | 38.0 |
| Benaderde gewigte in kg, digtheid 8 kg/dm3 | ||||
ASME B16.9 SS Bend Angularity Tolerance
| ND | Maksimum afhoek | Maks van die vliegtuig af |
| Q | P | |
| 1/2 'n 4 | 1 | 2 |
| 5 tot 8 | 2 | 4 |
| 10 tot 12 | 3 | 5 |
| 14 tot 16 | 3 | 7 |
| 18 tot 24 | 4 | 10 |
| 26 tot 30 | 5 | 10 |
| 32 tot 42 | 5 | 13 |
| 44 tot 48 | 5 | 20 |
AVAILABLE TYPES OF BUTTWELD WELDED PIPE BEND
| Super Duplex Steel Welded Pipe Bend | Copper Nickel Welded Pipe Bends |
| Stainless Steel Welded Pipe Bend | SS Welded Pipe Bends |
| ANSI B16.9 Welded Pipe Bend | ASME B16.28 Buttweld Welded Bend |
| 5D Welded Pipe Bends | 1D Welded Pipe Bends |
| Carbon Steel Welded Pipe Bends | High Quality Welded Pipe Bend |
| Titanium Welded Pipe Bend | Inconel Butt weld Welded Pipe Bend |
| ASTM A403 Stainless Steel Welded Pipe Bends | Duplex Steel Welded Pipe Bends |
| Buttweld Welded Pipe Bend | Butt Weld Welded Pipe Bends |
| High Nickel Alloy Welded Pipe Bend | Hastelloy Welded Pipe Bend |
| ASME B16.9 Welded Pipe Bend | 90 Degree Welded Pipe Bend |
English
Afrikaans
Arabic
Bengali
Catalan
Chinese
French
Dutch (Belgium)
Dutch
German
Czech
Greek
Hindi
Japanese
Italian
Portuguese
Spanish (Chile)
Spanish (Colombia)
Spanish (Argentina)
Persian
Estonian
Albanian
Russian
Spanish (Peru)
Indonesian
Thai
Vietnamese
Georgian
Korean
Nepali
Polish
Ukrainian
Malayalam
Xhosa