Tel: +86-577-85980211  E-post: [email protected]

Wenzhou Kaixin Metal Co., Ltd.

 

Tööstuslik roostevabast terasest toruliitmikud/

  1. Kodu
  2. Tooted
  3. Tööstuslik roostevabast terasest toruliitmikud
  4. Roostevabast terasest kontsentriline üleminekuühendus
Stainless Steel Concentric Reducer

Roostevabast terasest kontsentriline üleminekuühendus

Nimi:Kontsentriline üleminekutükk

Suurused:Õmbluseta üleminekutükk (1/2″–24″), ERW / keevitatud / valmistatud üleminekutükk (1/2″–48″)

Paksus:Mudelid 5S, 10S, 20S, S10, S20, S30, STD, 40S, S40, S60, XS, 80S, S80, S100, S120, S140, S160, XXS jne.

Hinnangud ja materjalid:304/L/H/LN, 316/L/H/LN/Ti, 321/H, 317/L/LN, 347/H, 310S/H, N08904 (904L), S31803, S32205, S32750, S32760, N02200, N02201, N04400, N06600, N06690, N06625, N06985(G3), N08028, N08800, N08810, N08811, N08825; Monel, nikkel, Inconel, Hastalloy, titaan, tantaal, roostevaba teras, legeeritud teras, süsinikteras, vask-nikkel 90/10 ja 70/30, roostevaba teras ASME / ASTM SA / A403 SA / A 774 WP-S, WP-W, WP-WX, 304, 304L, 316, 316L, 304/304L, 316/316L, DIN 1.4301, DIN 1.4306, DIN 1.4401, DIN 1.4404

Tüüp:Põikõmblus (BW) / õmbluseta / keevitatud / ERW / valmistatud

Saatja:Kontsentriline reduktor, torureduktor, kontsentrilised torureduktorid, liitmikud – kontsentrilised reduktorid.

Kõverusraadius:R=1D – 10D, 15D, 20D

Kattematerjal / Pinnatöötlus:Rostuvastane värv, õlimust värv, läbipaistev kollane, tsingitud, külm- ja kuumtsingitud

Ühenduse tüüp:Põikõmblusliitmikud

Taotlus: Naftaväljad, avamereprojektid, veesüsteemid, laevaehitus, maagaas, elektrienergia, torustikuprojektid jne.

Originaal: Wenzhou,Zhejiang

Standrad:ANSI – B 16.9, ASTM A403 – ASME SA403 – ‘Standardspetsifikatsioon sepistatud austeniitse roostevabast terasest toruliitmike kohta’, API 590–605, ASME B16.9 – ‘Tehases valmistatud sepistatud põikõmblusliitmikud”, ASME B16.25 – ‘Põikõmblusotsad’, ASME B16.28 – ‘Sepistatud terasest lühiraadiusega põikõmblusliitmikud ja tagasipöörded’, MSS SP-43 – ‘Sepistatud ja valmistatud põikõmblusliitmikud madalrõhu ja korrosioonikindlateks rakendusteks’

Pakett:Standardne ekspordipakett

Hind:10–500 USD/tk

Kohaletoimetamine:Kokkulepe Kogus

Saada päring Otse vestlus
  • Toote üksikasjad

Roostevabast terasest kontsentriline reduktor on toruliitmiku tüüp, mida kasutatakse erineva suurusega torude ühendamiseks torustikus. Tegemist on koonilise kujuga liitmikuga, mis kitsendab toru läbimõõtu, säilitades samal ajal toru keskjoone. Redutseerijal on üks suurem ja teine väiksem ots ning seda kasutatakse erineva suurusega torude ühendamiseks keevitamise või keermestamise teel. Roostevabast terasest kontsentrilisi redutseerijaid kasutatakse tavaliselt tööstuslikes torustikes, kus on vaja vähendada vedeliku või gaasi voolu. Need on valmistatud kõrgekvaliteedilisest roostevabast terasest, mis muudab need korrosioonikindlaks ja sobivaks kasutamiseks kõrgrõhu- ja kõrgtemperatuursetes rakendustes. Redutseerija kontsentriline konstruktsioon tagab, et vedeliku voolus ei teki turbulentsi, mis aitab säilitada torustiku üldist tõhusust.

 Keskjoonelise keevitusega reduktori tehnilised andmed

SuurusedÕmbluseta toru vähendav T-liitmik (1/2″–24″), ERW / keevitatud / valmistatud toru vähendav T-liitmik (1/2″–48″)
StandardidANSI – B 16.9, ASTM A403 – ASME SA403 – ‘Standardspetsifikatsioon sepistatud austeniitse roostevabast terasest toruliitmike kohta’, API 590–605, ASME B16.9 – ‘Tehases valmistatud sepistatud põikõmblusliitmikud”, ASME B16.25 – ‘Põikõmblusotsad’, ASME B16.28 – ‘Sepistatud terasest lühiraadiusega põikõmblusliitmikud ja tagasipöörded’, MSS SP-43 – ‘Sepistatud ja valmistatud põikõmblusliitmikud madalrõhu ja korrosioonikindlateks rakendusteks’
MõõtmedANSI B16.9, ANSI B16.28, MSS-SP-43 tüüp A, MSS-SP-43 tüüp B, JIS B2312, JIS B2313
PaksusMudelid 5S, 10S, 20S, S10, S20, S30, STD, 40S, S40, S60, XS, 80S, S80, S100, S120, S140, S160, XXS jne.
Kõverusraadius R=1D – 10D, 15D, 20D
AlatesKontsentriline üleminekutükk, toru üleminekutükk, torude kontsentrilised üleminekutükid, kontsentrilised liitmikud

Reduktorid.

Hinnangud&Materjalid304/L/H/LN, 316/L/H/LN/Ti, 321/H, 317/L/LN, 347/H, 310S/H, N08904 (904L), S31803, S32205, S32750, S32760, N02200, N02201, N04400, N06600, N06690, N06625, N06985(G3), N08028, N08800, N08810, N08811, N08825, pind, monel, nikkel, inconel, hastalloy, titaan, tantaal, roostevaba teras, legeeritud teras, süsinikteras, vask-nikkel 90/10 ja 70/30, roostevaba teras ASME / ASTM SA / A403 SA / A 774 WP-S, WP-W, WP-WX, DIN 1.4301, DIN 1.4306, DIN 1.4401, DIN 1.4404
TüüpPõikõmblus (BW) / õmbluseta / keevitatud / ERW / valmistatud
Kattematerjal / PinnatöötlusRostuvastane värv, õlimust värv, läbipaistev kollane, tsingitud, külm- ja kuumtsingitud

Keskjooneliste keevitusliitmikega reduktorite tootmisstandardid

ASME standardASME/ANSI B16.9, ASME/ANSI B16.28, MSS-SP-43
DIN-standardDIN 28011, DIN 2617, DIN 2616, DIN 2615, DIN 2605
EN-standardEN 10253-2, EN 10253-1
ASME B16.25Põikõmblusotsad
ASME B16.9Tehases valmistatud sepistatud liitmike otskeevitus
ASME B16.28Wrought Steel Eccentric Reducer
ASTM A403 – ASME SA403Standard Specification for Wrought Austenitic Stainless Steel Piping Fitting
MSS SP-43Sepistatud ja valmistatud põikõmblusliitmik madalrõhu ja korrosioonikindlate rakenduste jaoks

KONTSENTRILINE PÕHJAKEEVITUSEGA REDUKTOR – MATERJALID JA KLASSID

Stainless Steel Concentric Reducers – ButtweldASTM A403 WP316/316L, ASTM A403 SA / A 774 WP-S, WP-W, WP-WX 304/304L, ASTM A182 F316L, 304L, DIN 1.4301, DIN 1.4306, DIN 1.4401, DIN 1.4404
Duplex & Super Duplex Steel Concentric Reducers – ButtweldASTM A 815, ASME SA 815, UNS nr S31803, S32205. UNS S32750, S32950. Materjalikood 1.4462
Carbon Steel Concentric Reducers – ButtweldASTM A234, ASME SA234 WPB, WPBW, WPHY 42, WPHY 46, WPHY 52, WPH 60, WPHY 65 ja WPHY 70.
Low Temperature Carbon Steel Concentric Reducers – ButtweldASTM A420 WPL3, A420 WPL6
Alloy Steel Concentric Reducers – ButtweldASTM / ASME A/SA 234 klassid WP 1, WP 5, WP 9, WP 11, WP 12, WP 22, WP 91
Nickel Alloy Concentric Reducers – ButtweldASTM B336, ASME SB336, Nickel 200 (UNS nr N02200), Nickel 201 (UNS nr N02201), Monel 400 (UNS nr N04400), Monel 500 (UNS nr N05500), Inconel 800 (UNS nr N08800), Inconel 825 (UNS nr N08825), Inconel 600 (UNS nr N06600), Inconel 625 (UNS nr N06625), Inconel 601 (UNS nr N06601), Hastelloy C 276 (UNS nr N10276), Alloy 20 (UNS nr N08020), titaan (I ja II klass), vask-nikkel 70/30, CuNi10Fe1Mn, CuNi30Mn1Fe.

Keskjoonelise keevitusega reduktori mõõtmed

Dimensions are in millimeters unless otherwise indicated. Wall thickness (t) should be nominative by client. Outlet dimension (M) for NPS twenty-six and bigger is usually recommended however not needed.

Toru nimimõõdud (NPS)Outside Diameter(OD)   at BevelEnd-to- End, H
Large EndSmall  End
3/4×1/226.721.338
 3/4×3/826.717.338
1×3/433.426.751
1×1/233.421.3
1-1/4×142.233.451
1-1/4×3/442.226.7
1-1/4×1/242.221.3
1-1/2×1-1/448.342.264
1-1/2×148.333.4
1-1/2×3/448.326.7
1-1/2×1/248.321.3
2×1-1/260.348.376
2×1-1/460.342.2
2×160.333.4
2×3/460.326.7
2-1/2×27360.389
2-1/2×1-1/27348.3
2-1/2×1-1/47342.2
2-1/2×17333.4
3×2-1/288.97389
3×288.960.3
3×1-1/288.948.3
3×1-1/488.942.2
3-1/2×3101.688.9102
3-1/2×2-1/2101.673
3-1/2×2101.660.3
3-1/2×1-1/2101.648.3
3-1/2×1-1/4101.642.2
4×3-1/2114.3101.6102
4×3114.388.9
4×2-1/2114.373
4×2114.360.3
4×1-1/2114.348.3
5×4141.3114.3127
5×3-1/2141.3101.6
5×3141.388.9
5×2-1/2141.373
5×2141.360.3
6×5168.3141.3140
6×4168.3114.3
6×3-1/2168.3101.6
6×3168.388.9
6×2-1/2168.373
8×6219.1168.3152
8×5219.1141.3
8×4219.1114.3
8×3-1/2219.1101.6
10×8273219.1178
10×6273168.3
10×5273141.3
10×4273114.3
12×10323.8273203
12×8323.8219.1
12×6323.8168.3
12×5323.8141.3
14×12355.6323330
14×10355.6273
14×8355.6219.1
14×6355.6168.3
16×14406.4355.6356
16×12406.4323.8
16×10406.4273
16×8406.4219.1
18×16457.2406.4381
18×14457.2355.6
18×12457.2323.8
18×10457.2273
20×18508457.2508
20×16508406.4
20×14508355.6
20×12508323.8
22×20558.8508508
22×18558.8457.2
22×16558.8406.4
22×14558.8355.6
24×22609.6558.8508
24×20609.6508
24×18609.6457.2
24×16609.6406.4
26×24660610610
26×22660559
26×20660508
26×18660457
28×26711660610
28×24711610
28×20711508
28×18711457
30×28762711610
30×26762660
30×24762610
30×20762508
32×30813762610
32×28813711
32×26813660
32×24813610
34×32864813610
34×30864762
34×26864660
342×4864610
36×34914864610
36×32914713
36×30914762
36×26914660
36×24914610
38×36965914610
38×34965864
38×32965813
38×30965762
38×28965711
38×26965660
40×38965965610
40×361016914
40×341016864
40×321016813
40×301016762
42×4010161016610
42×381067965
42×361067914
42×341067864
42×321067813
42×301067762
44×4211181067610
44×4011181016
44×381118965
44×361118914
46×4411681118711
46×4211681067
46×4011681016
46×381168965
48×4612191168711
48×4412191118
48×4212191067
48×4012191016

Kontsentrilise reduktori mõõdetolerants

Nominal Pipe Size1/2 to 2.1/23 to 3.1/245 to 8
Välisläbimõõt
at Bevel (D)		+ 1.6
– 0.8		1.61.6+ 2.4
– 1.6
Inside Diameter at End0.81.61.61.6
Overall Length (H)2222
Nominal Pipe Size10 to 1820 to 2426 to 3032 to 48
Välisläbimõõt
at Bevel (D)		+ 4
– 3.2		+ 6.4
– 4.8		+ 6.4
– 4.8		+ 6.4
– 4.8
Inside Diameter at End3.24.8+ 6.4
– 4.8		+ 6.4
– 4.8
Overall Length (H)2255
Wall Thickness (t)Not less than 87.5% of Nominal Wall Thickness

Keskjoonelise üleminekutüki kaalu arvutaja keevitusliitmiste jaoks

Approximate weight of a Butt welding Eccentric Reducer are calculated supported its header length, header size, branch size, branch length, header wall thickness and branch wall thickness. Please note that actual weight of a tee from a particular manufacturer might vary counting on manufacturing methodology. Dimensional standards like ASME B16.9 do not supply weights of butt attachment fittings.

Weight of a Butt Weld Eccentric Reducer as per ASME B16.9 is calculated as per following formula :

0.02466 * S <(D+d)/2 – S> * H / 1000

W = Weight in Kg

OD1 = Large Size Outside Diameter (mm)

OD2 = Smaller Size Outside Diameter (mm)

t = Wall Thickness (mm)

H = End to End Dimension (mm)

ASME B16.9 otskeevitatavate eksentriliste üleminekutükkide kaalutabel (kg)

NPSLBSKG
4-33.381.53
4-2.1/23.251.47
4-231.36
3.1/2-2.1/22.881.31
3.1/2-22.751.25
3.1/2-1.1/22.51.13
3.1/2-1.1/42.41.09
4-3.1/23.51.59
4-1.1/22.881.31
5-462.72
5-3.1/25.752.61
5-35.52.49
5-2.1/25.252.38
5-252.27
6-58.53.86
6-48.253.74
6-3.1/28.253.74
6-383.63
6-2.1/27.253.29
8-613.25.99
8-5125.44
8-4114.99
8-3.1/2114.99
10-8229.98
10-621.59.75
10-5219.53
10-4209.07
12-103415.42
12-83214.51
12-63114.06
12-53013.61
14-126027.22
14-1059.226.85
14-858.526.54
14-65826.31
16-147132.21
16-127031.75
16-1069.531.52
16-868.531.07
16-6––
18-168538.56
18-148438.1
3/4-1/20.170.08
3/4-3/80.150.07
1-3/40.40.18
1-1/20.40.18
1.1/4-10.50.23
1.1/4-3/40.40.18
1.1/4-1/20.40.18
1.1/2-1.1/40.70.32
1.1/2-10.620.28
1.1/2-3/40.540.24
1.1/2-1/20.50.23
2-1.1/20.90.41
2-1.1/40.840.38
2-10.760.34
2-3/40.70.32
2.1/2-21.50.68
2.1/2-1.1/21.380.63
2.1/2-1.1/41.250.57
2.1/2-11.250.57
3-2.1/220.91
3-21.80.82
3-1.1/21.70.77
3-1.1/41.60.73
3.1/2-33.151.43
18-128337.65
18-108237.19
18-8––
20-1812556.7
20-1612456.25
20-1412255.34
20-1212054.43
20-10––
20-8––
22-2014264.41
22-1813862.6
22-1613159.42
22-1412355.79
22-12––
22-10––
24-22––
24-2015068.04
24-1814867.13
24-1614565.77
24-14––
30-26232105.23
30-24224101.6
30-2222099.79
30-2022099.79
24-12––
24-10––
26-2420793.89
26-2220090.72
26-2019086.18
26-1818282.55
26-16––
26-14––
26-12––
28-26224101.6
28-2421697.98
28-2221095.25
28-2019990.26
30-28241109.32

Kontsentrilise reduktori nurgalisuse tolerants

NDMaksimaalne kõrvalekalleMaksimaalne kõrvalekalle tasapinnast
QP
1/2 4-st12
5–824
10–1235
14–1637
18–24410
26–30510
32–42513
44–48520

Milline on kontsentrilise keevitusliitmikuga reduktori kasutusotstarve?

  • They are helpful in services wherever cavitation is present.
  • When transporting between flanges or pipes of various ratings and wear protection is important, concentrical reducers are ideal.
  • Concentric reducers are utilized in discharge of the pump.
  • Concentric reducers can transition graciously between the piping and also the pump.
  • The concentrical reducers facilitate in transporting slurries or abrasive liquids.

Available Types of ASME B16.9 Buttweld Concentric Reducer

Buttweld Concentric ReducerASME B16.28 Butt weld Concentric Reducer
Hastelloy Concentric ReducerASME B16.9 Buttweld Concentric Pipe Reducer
High Nickel Alloy Concentric ReducerInconel Butt weld Concentric Reducer
ANSI B16.9 Buttweld Concentric ReducerTitanium Buttweld Concentric Reducer
Steel Reducer Pipe FittingsHigh Quality Concentric Reducer
Roostevabast terasest kontsentriline üleminekuühendusSeamless Butt weld Concentric Reducer
Welded Butt weld Concentric ReducerSS Concentric Reducers
Carbon Steel Concentric ReducerButt Weld Pipe Reducers
Copper Nickel Concentric ReducerDuplex Steel Buttweld Concentric Reducer
Super Duplex Steel Buttweld Concentric ReducerASTM A403 Stainless Steel Concentric Reducer

Keskjoonelise keevitatava reduktori kasutamine

ASME B16.9 Concentric Reducer are known to deliver exceptional performance and are generally developed for meeting the demands. We offer a broad range of Buttweld Reducer through a worldwide network of stock-keeping branches. These Concentric Pipe Reducer is use in various industries like :

  • Stainless Steel Buttweld Concentric Reducer uses in Oil and Gas Pipeline
  • Butt weld Concentric Reducers uses in Chemical Industry
  • Alloy Steel Concentric Reducer uses in Plumbing
  • Buttweld Concentric Pipe Reducer uses in Heating
  • Buttweld Concentric Reducer Fittings uses in Water Supply Systems
  • ANSI B16.9 Buttweld Concentric Reducer uses in Power Plant
  • Buttweld Concentric Reducer Fitting uses in Paper & Pulp Industry
  • Concentric Reducer uses in General Purpose Applications
  • Buttweld Concentric Reducer uses in Fabrication Industry
  • Concentric Reducer uses in Food Processing Industry
  • Buttweld Concentric Reducer uses in Structural Pipe
Sildid:

Eelmine:

Järgmine:

Seotud tooted

Lisa kommentaar

Telefon +86-577-85980211

WhatsApp +8613587625968

QQ 306208216

Jäta sõnum

    Palun tõestage, et olete inimene, valides süda.