不锈钢管供应商温州凯信中国
What is stainless steel 316Ti?
316Ti stainless steel is very good stainless steel grade for enviroments which are corrosive. This grade is written as 1.4571 or X6CrNiMoTi17-12-2 according to EN norm and it is written as UNS S31635 according to UNS norm. 1.4571 material has a better corrosion resistance to 316L grade because of its titanium content. Titanium makes 1.4571 stainless steel material more corrosion resistant and also makes the material stronger to friction. 316Ti grade is a really good alternative to 316 grade material and it usually accepted ass a better grade then 321 (1.4541) grade. The Titanium element in this grade is a really hard element to melt it and if titanium does not melted correctly and spread homogeneously, then the machinability will be very low. The titanium element inside 316Ti material also makes this grade better for high degree temperatures. 1.4571 usually used in chemical industries, pump shafts, marine industries.
316Ti stainless steel 1.4571 Finished Products Form
- Round, Sqaure, Hexagon & Flat Bars
- 无缝的 / Welded Pipes
- 无缝的 / Welded Tubes
- 热的 & Cold Rolled Plates & Sheets
- Forged Bars
- Buttweld Pipe Fittings
- Forged Fittings
- Ferrule Compression Fittings
- Forged Flanges
- Valves
- Guages
Applications for 316Ti stainless steel
Construction encasement, doors, windows and armatures, off-shore modules, container and tubes for chemical tankers, warehouse and land transportation of chemicals, food and beverages, pharmacy, synthetic fibre, paper and textile plants and pressure vessels. Due to the Ti-alloy, resistance to intergranular corrosion is guaranteed after welding.
乙quivalents of grade 316Ti
| 欧洲联盟 在 | 美国 – | Germany 从,WNr | Japan 他 | 法国 AFNOR | England BS | Italy UNI | 中国 GB | 瑞典 SS | Poland PN | Czechia CSN | Finland SFS | Austria ONORM | Russia 国家标准 |
| X6CrNiMoTi17-12-2 (1.4571) | 316的 | X10CrNiMoTi18-10X6CrNiMoTi17-12-2 | 316TiSUS316Ti | Z6CNDT17-12Z6CNT17-12 | 320S31321S12 | X6CrNiMoTi17-12 | 0Cr18Ni12Mo2Ti1Cr18Ni12Mo2Ti | 23502350-02 | H17N13M2T | 17348 | 761 | X6CrNiMoTi17-12-2S | 08KH17N13M2T10KH17N13M2T |
作品 ranges for 316ti grade of stainless steel
| 年级 | 在 | 锰 | 磷 | C | S | 和 | 铬 | 莫 | 氮 | |
| 316的 | 分钟. | 10.0 | – | – | – | – | – | 16.0 | 2.00 | – |
| 最大限度. | 14.0 | 2 | 0.045 | 0.08 | 0.03 | 0.75 | 18.0 | 3.00 | 0.1 | |
机械性能
| 年级 | 抗拉强度 (兆帕) 分钟 | 伸长 (% in 50mm) 分钟 | 屈服强度 0.2% Proof (兆帕) 分钟 | 硬度 | |
| Rockwell B (HR B) 最大限度 | Brinell (HB) 最大限度 | ||||
| 316的 | 515 | 35 | 205 | 75 | 20 |
物理特性
| 物理特性 (Room Temperature) | ||
| 比热 (0-100℃) | 500 | J.kg-1.°K-1 |
| 导热系数 | 14.6 | 宽度m -1.°K-1 |
| 热膨胀 | 16.5 | 毫米/米/°C |
| 弹性模量 | 193 | GPa |
| 电阻率 | 7.4 | 微欧/厘米 |
| 密度 | 7.99 | 克/立方厘米 |
耐腐蚀性能
One of the essential properties of 316TI stainless steel is its corrosion resistance. This alloy contains a high percentage of chromium, which gives it excellent resistance to corrosion in various environments, including marine, 化学, and food processing applications.
热处理
退火
To anneal, heat the work piece to 1868-2030°F (1020-1110℃), then cool in water or air.
热加工
Heat the material to a minimum temperature of 1652°F (900℃) and do not let the temperature drop below this temperature. The ideal temperature range is between 2102-2300°F (1150-1260C), then cool in air after. To ensure the highest possible corrosion resistance afterwards annealing is recommended.
冷加工
Stainless 316Ti has good cold forming properties and are suited for brake and roll forming as well as stamping, heading and drawing. To reduce internal stresses a post work annealing is recommended. Cold working increases strength as well as hardness for this steel grade.
Machinability
To avoid excess work hardening keep the cutting edges sharp. Lubricants and coolants should be used liberally to avoid heat concentration at the cutting edges. Chip breakers should be employed to keep the work piece clear.
焊接
Stainless steel 316Ti can be welded with most common welding methods with or without fillers. Gas welding should be avoided as this will risk carburization. A heat treatment is not necessary after welding and tempering colors should be removed chemically or mechanically to maintain the best possible corrosion resistance.