سٹینلیس سٹیل پائپ فراہم کنندہ وینزو کائیکسن چین
TP316/316L 1.4404/1.4401 Austenitic Stainless Steel Seamless Pipe Pcs checking and inspection done in our warehouse
Sizes list which we have loaded
- 219.10 MM OD × 3.76 MM THK × 6000 MM LENGTH SMLS PIPE ASTM/ASME A/SA 312 میں 10216-5 TC1 TP 316/316L 1.4401/1.4404
- 273.03 MM OD × 12.70 MM THK × 6000 MM LENGTH SMLS PIPE ASTM/ASME A/SA 312 میں 10216-5 TC1 TP 316/316L 1.4401/1.4404
- 273.03 MM OD × 4.19 MM THK × 6000 MM LENGTH SMLS PIPE ASTM/ASME A/SA 312 میں 10216-5 TC1 TP 316/316L 1.4401/1.4404
- 323.90 MM OD × 12.70 MM THK × 6000 MM LENGTH SMLS PIPE ASTM/ASME A/SA 312 میں 10216-5 TC1 TP 316/316L 1.4401/1.4404
- 323.90 MM OD × 4.57 MM THK × 6000 MM LENGTH SMLS PIPE ASTM/ASME A/SA 312 میں 10216-5 TC1 TP 316/316L 1.4401/1.4404
- 219.10 MM OD ×8.18 MM THK × 6000 MM LENGTH SMLS PIPE ASTM/ASME A/SA 312 میں 10216-5 TC1 TP 304/304L 1.4301/1.4307
- 273.03 MM OD ×12.70 MM THK × 6000 MM LENGTH SMLS PIPE ASTM/ASME A/SA 312 میں 10216-5 TC1 TP 304/304L 1.4301/1.4307
- 273.03 MM OD × 4.19 MM THK × 6000 MM LENGTH SMLS PIPE ASTM/ASME A/SA 312 میں 10216-5 TC1 TP 304/304L 1.4301/1.4307
- 273.03 MM OD × 9.27 MM THK × 6000 MM LENGTH SMLS PIPE ASTM/ASME A/SA 312 میں 10216-5 TC1 TP 304/304L 1.4301/1.4307
- 323.90 MM OD ×12.70 MM THK × 6000 MM LENGTH SMLS PIPE ASTM/ASME A/SA 312 میں 10216-5 TC1 TP 304/304L 1.4301/1.4307
- 323.90 MM OD ×4.57 MM THK × 6000 MM LENGTH SMLS PIPE ASTM/ASME A/SA 312 میں 10216-5 TC1 TP 304/304L 1.4301/1.4307
1.A999/A999M: Each pipe shall be subjected to the nondestructive electric test or the hydrostatic test, the pipe of test to be used shall be at the option of the mfg, unless otherwise specified in the PO.
2. The Pipe lengths : Unless otherwise agreed upon, all size from NPS 1/8” TO AND INCLUDING nps 32inch are available in a length up to 24ft with the permitted range of 15 to 24 ft. Short length are acceptable and the number and min, length shall be agreed upon between mfg and purchaser.
3. The finished pipe shall be reasonably straight and shall have workmanlike finish, Removal of imperfections by grinding is permitted, provided the W.T are not decreased to the less than the permitted in Section 9 of Specification A999/A999M
4. Butt Weld End: According to ANSI B 16.25
5. Pipe Marking: Specified in A999/999M, include “Logo(YHSS)+Standard+SIZE+Heat No.+Lot No.+H.T/E.T/U.T”
6. Packing: Each Pipe end is protected by Plastic cap. Then packed by Anti-rust steel strip, The outside of the bundle is plastic woven bag, or Plastic film.
7. Packing Mark: SIZE + STEEL GRADE+ QTY OF PIECE/WEIGHT/METRE.
8.MTC: KXTINGHSHAN Official Original MTC paper will be supplied for each order.
