Wenzhou Kaixin Kaixin Metal Co., Ltd.
What is stainless steel 316Ti?
316Ti stainless steel is very good stainless steel grade for enviroments which are corrosive. This grade is written as 1.4571 or X6CrNiMoTi17-12-2 according to EN norm and it is written as UNS S31635 according to UNS norm. 1.4571 material has a better corrosion resistance to 316L grade because of its titanium content. Titanium makes 1.4571 stainless steel material more corrosion resistant and also makes the material stronger to friction. 316Ti grade is a really good alternative to 316 grade material and it usually accepted ass a better grade then 321 (1.4541) grade. The Titanium element in this grade is a really hard element to melt it and if titanium does not melted correctly and spread homogeneously, then the machinability will be very low. The titanium element inside 316Ti material also makes this grade better for high degree temperatures. 1.4571 usually used in chemical industries, pump shafts, marine industries.
316Ti stainless steel 1.4571 Fertigprodukte Form
- Runden, Sqaure, Hexagon & Flat Bars
- Nahtlos / Welded Pipes
- Nahtlos / Welded Tubes
- Heiß & Cold Rolled Plates & Sheets
- Forged Bars
- Buttweld Pipe Fittings
- Forged Fittings
- Ferrule Compression Fittings
- Forged Flanges
- Valves
- Guages
Applications for 316Ti stainless steel
Construction encasement, doors, windows and armatures, off-shore modules, container and tubes for chemical tankers, warehouse and land transportation of chemicals, food and beverages, pharmacy, synthetic fibre, paper and textile plants and pressure vessels. Due to the Ti-alloy, resistance to intergranular corrosion is guaranteed after welding.
Equivalents of grade 316Ti
| EU IN | USA – | Deutschland AUS,Machen | Japan ER | Frankreich Afnor | England BS | Italien Uni | China GB | Schweden Ss | Polen Pn | Tschechien CSN | Finnland SFS | Österreich Onorm | Russland GOST |
| X6CrNiMoTi17-12-2 (1.4571) | 316Von | X10CrNiMoTi18-10X6CrNiMoTi17-12-2 | 316TiSUS316Ti | Z6CNDT17-12Z6CNT17-12 | 320S31321S12 | X6CrNiMoTi17-12 | 0Cr18Ni12Mo2Ti1Cr18Ni12Mo2Ti | 23502350-02 | H17N13M2T | 17348 | 761 | X6CrNiMoTi17-12-2S | 08KH17N13M2T10KH17N13M2T |
Zusammensetzung ranges for 316ti grade of stainless steel
| Grad | In | Mn | P | C | S | Und | Cr | MO | N | |
| 316Von | min. | 10.0 | – | – | – | – | – | 16.0 | 2.00 | – |
| max. | 14.0 | 2 | 0.045 | 0.08 | 0.03 | 0.75 | 18.0 | 3.00 | 0.1 | |
Mechanische Eigenschaften
| Grad | Zugfestigkeit (MPa) min | Verlängerung (% in 50mm) min | Streckgrenze 0.2% Nachweisen (MPa) min | Härte | |
| Rockwell b (Hr b) max | Brinell (Hb) max | ||||
| 316Von | 515 | 35 | 205 | 75 | 20 |
Physikalische Eigenschaften
| Physikalische Eigenschaften (Raumtemperatur) | ||
| Spezifische Wärme (0-100°C) | 500 | J.kg-1.°K-1 |
| Wärmeleitfähigkeit | 14.6 | W.m -1.°K-1 |
| Wärmeausdehnung | 16.5 | mm/m/°C |
| Elastizitätsmodul | 193 | GPa |
| Elektrischer Widerstand | 7.4 | μOhm/cm |
| Dichte | 7.99 | g/cm3 |
Korrosionsbeständigkeit
One of the essential properties of 316TI stainless steel is its corrosion resistance. This alloy contains a high percentage of chromium, which gives it excellent resistance to corrosion in various environments, including marine, chemisch, and food processing applications.
Wärmebehandlung
Glühen
To anneal, heat the work piece to 1868-2030°F (1020-1110°C), then cool in water or air.
Hot working
Heat the material to a minimum temperature of 1652°F (900°C) and do not let the temperature drop below this temperature. The ideal temperature range is between 2102-2300°F (1150-1260C), then cool in air after. To ensure the highest possible corrosion resistance afterwards annealing is recommended.
Kaltes Arbeiten
Stainless 316Ti has good cold forming properties and are suited for brake and roll forming as well as stamping, heading and drawing. To reduce internal stresses a post work annealing is recommended. Cold working increases strength as well as hardness for this steel grade.
Verarbeitbarkeit
To avoid excess work hardening keep the cutting edges sharp. Lubricants and coolants should be used liberally to avoid heat concentration at the cutting edges. Chip breakers should be employed to keep the work piece clear.
Welding
Stainless steel 316Ti can be welded with most common welding methods with or without fillers. Gas welding should be avoided as this will risk carburization. A heat treatment is not necessary after welding and tempering colors should be removed chemically or mechanically to maintain the best possible corrosion resistance.
Advantages of 316Ti Stainless Steel in Industry
316Ti Stainless Steel is a remarkable material in the industrial world. Its unique properties make it a preferred choice for many applications. This stainless steel grade stands out for its enhanced corrosion resistance and durability.
The addition of titanium to 316Ti Stainless Steel offers significant advantages. It prevents carbide precipitation during welding, ensuring long-lasting performance. This makes it ideal for high-temperature and corrosive environments.
Industries such as chemical processing and food production benefit greatly from 316Ti. Its ability to withstand harsh conditions ensures reliability and longevity. Understanding its advantages can guide better material selection in various sectors.
316Ti vs 316: Key Differences
When comparing 316Ti to 316, titanium addition stands out. This minor change significantly affects performance in demanding environments. 316Ti maintains its structural properties better at high temperatures, making it favorable for specific uses.
Key differences between 316Ti and 316 enthalten:
- 316Ti contains titanium for improved thermal stability
- 316 is more prone to carbide precipitation
- 316Ti offers enhanced corrosion resistance in certain environments
These differences mean 316Ti is often preferred for applications where heat and corrosion resistance are critical. This choice can impact the lifespan and reliability of industrial components.
Conclusion
Zusammenfassend, 316Ti Stainless Steel is an exceptional choice for industries needing durability, corrosion resistance, and high-temperature performance. Its diverse applications and unique advantages make it a preferred material across various sectors, ensuring quality and reliability.