What is stainless steel 316L (EUA 31603)1.4404?
1.4404 is an acid-resisting austenitic stainless steel with 17% Cr, 12% Ni and 2,0% Mo. Due to its Mo content, Aquest material té una resistència a la corrosió millorada significativament en comparació amb els acers inoxidables. 1.4404 és resistent a la reducció de l’acció d’àcids orgànics i inorgànics, així com contra els mitjans que contenen halògens. A més, Aquest acer és menys susceptible de posar -se. El baix contingut en carboni també millora la resistència a la corrosió intergranular i permet utilitzar a temperatures més elevades fins a 450 ° C en funcionament continu. 1.4404 pot estar en fred i soldar -se excel·lent. Aquest material s'utilitza principalment en el producte químic, indústries tèxtils i de paper, i sovint s’utilitza en aparells, a la indústria sanitària i a la fabricació de canonades.
Equivalent Grades of Stainless Steel 1.4404
EU EN | Estats Units – | Alemanya DE,Fer | Japó Ell | França AFNOR | Anglaterra BS | Itàlia Sola | Xina GB | Suècia Ss | Polònia PN | Txèxia Csn | Finlàndia SFS | Àustria Part | Inter ISO |
X2CrNiMo17-12-2 (1.4404) | 316L | X2CrNiMo17-13-2 | SUS316SUS316L | Z2CND17-12Z3CND17-11-02Z3CND18-12-02 | 316S11 | X2CrNiMo17-12X2CrNiMo17-17-12 | 00Cr17Ni14Mo20Cr18Ni12Mo2Ti | 2348 | 00H17N13M200H17N14M2 | 17349 | 750 | X2CrNiMo17-13-2KKW | Type19 |
Ss 1.4404 Chemical Composition(%)
C | I | Mn | P | S | Cr | Mo | En | N |
≤ % | ≤ % | ≤ % | ≤ % | ≤ % | % | % | % | ≤ % |
0,03 | 1,0 | 2,0 | 0,045 | 0,015 | 16,5-18,5 | 2,0-2,5 | 10,0-13,0 | 0,11 |
Mechanical Properties
The values given refer to the diameter range ≤ 160 (Ø in mm) i 160 < d ≤ 250 (Ø in mm)*
Hardness in HB: ≤ 215
Yield strength Rp0.2 in Mpa: ≥ 200
Yield strength Rp1.0 in Mpa: ≥ 235
Strength / tensile strength Rm in Mpa: 500-700
Elongation at break A in % (longitudinal) at ≤ 160: ≥ 40
* These figures refer to mechanical properties at room temperature in the solution-annealed state (according to EN 10088-3)
Physical Properties
Density in kg/dm3 | 8,0 |
Thermal conductivity at 20°C in W/(m K) | 15 |
Electr. Resistance at 20°C (Ω mm2 /m) | 0,75 |
Specific heat capacity at 20°C (J/kg K) | 500 |
Supplied Forms
Llençol;Tira;Tub;Prohibir;Pipa;Placa;Accessoris & Brides;Angle.
Corrosion Resistance
Due to the low carbon content, the material 1.4404 is resistant to intercrystalline corrosion but not sea water resistant. In natural environmental media and moderate concentrations of chlorine and salt, this grade of material has excellent corrosion resistance.
Fabrication
Fabrication of all stainless steels should be done only with tools dedicated to stainless steel materials. Tooling and work surfaces must be thoroughly cleaned before use. These precautions are necessary to avoid cross contamination of stainless steel by easily corroded metals that may discolour the surface of the fabricated product.
Heat Treatment
Cold Working
Grau 316 is readily brake or roll formed into a variety of parts. It is also suited to stamping, heading and drawing but post work annealing is recommended to relieve internal stresses.
Cold working will increase both strength and hardness of 316 acer inoxidable.
Hot Working
All common hot working processes can be performed on 316 acer inoxidable. Hot working should be avoided below 927°C. The ideal temperature range for hot working is 1149-1260°C. Post-work annealing is recommended to ensure optimum corrosion resistance.
Machinability
AISI 316L stainless steel has medium machinability. In direct comparison, the machinability of this stainless steel grade is better than that of AISI 316/1.4401 due to its lower carbon content.
Welding
AISI 316L stainless steel (1.4404 / X2CrNiMo17-12-2) has excellent weldability. The material can be used with all common welding methods (with the exception of gas welding). The addition of a welding filler metal and subsequent heat treatment are not normally required. Resistance to intergranular corrosion is not affected by welding.
Aplicacions
- Pulp and paper equipment;
- Heat exchanger;
- Dyeing equipment;
- Film processing equipment;
- Pipeline;
- Materials for exterior construction in coastal areas;
- Watch bracelet, case, etc. for advanced watches;
- Equipment for the use of marine, chemicals, dyes, paper, oxalic acid, fertilizer, etc.;
- Food industry;
- Rope;
- CD pole;
- Bolts and nuts;